Hotpoint WDF 740 G (UK).C Mode d'emploi Page 9

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 16
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 8
GB
9
Personalisation
Setting the temperature
By pressing the TEMPERATURE button to set the wash temperature (see Table of wash cycles).
The temperature may be lowered, or even set to a cold wash (
).
The washer-dryer will automatically prevent you from selecting a temperature which is higher than the
maximum value set for each wash cycle.
Setting the drying cycle
The desired drying cycle type may be set by pressing the
DRYING button once or several times. Two options are
available:
A - Based on time: from 40 to 180 minutes.
B - Based on the how damp the clothes are once they have
been dried:
Iron dry
: slightly damp clothes, easy to iron.
Cupboard dry
: very dry clothes, recommended for
towelling and bathrobes.
If your laundry load to be washed and dried is much greater than the maximum stated load (see adjacent
table), perform the wash cycle, and when the cycle is complete, divide the garments into groups and put some
of them back in the drum. At this point, follow the instructions provided for a "Drying only" cycle. Repeat this
procedure for the remainder of the load.
N.B.: when the drying is complete there is a cooling period, even though the DRYING button is in the 0 position.
Drying only
Turn the WASH CYCLE knob to one of the drying settings (11-12-13) according to the type of fabric, then
select the desired drying duration using the DRYING button.
Functions
The various wash functions available with this Washer-dryer will help to achieve the desired results, every time.
To activate the functions:
1. Press the button corresponding to the desired function;
2. the function is enabled when the corresponding indicator light is illuminated.
Note: If the indicator light flashes rapidly, this signals that this particular function may not be selected in
conjunction with the selected wash cycle.
Delay Start
To set a delayed start for the selected wash cycle, press the button repeatedly until the desired delay time is
displayed (this may be between 1 hour and 24 hours).
To disable the function press the button until the text
is displayed.
N.B. Once you have pressed the START/PAUSE button, the delay time may only be decreased if you wish to modify it.
This option is enabled with all programmes.
Mini Load
This function is recommended for when the load of laundry is equal to half, or less than half, of the maximum
recommended load (see Table of wash cycles).
This function may not be used in conjunction with wash cycles 5, 8, 11, 12, 13, B, C.
Super Wash
Because a greater quantity of water is used in the initial phase of the cycle, and because of the increased
cycle duration, this function offers a high-performance wash.
This function may not be used in conjunction with wash cycles 5, 8, 9, 10, 11, 12, 13, A, B, C.
Slow Spin (1400-600)
By selecting this function, reduces the spin speed.
This function may not be used in conjunction with wash cycles 8, 10, 11, 12, 13, C.
Table of Drying times (guideline values)
Fabric
type
Load type Max.
load
(kg)
Cupboard
dry
Iron
dry
Cotton Clothing of different
sizes, Terry towels
5180160
Syntheti-
cs
Sheets, Shirts, Pyjamas,
socks, etc.
3180160
Wool Knitwear, Pullovers, etc.
1,5 150 130
Vue de la page 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire