Hotpoint BFI620 Mode d'emploi télécharger pdf (Page 11)

1509)50-4

Before Using your Dishwasher

• Use the right amount of

detergent (see

programme chart).

• Store your detergent and

rinse aid in a cool, dry

place, safely away from

children.

 To obtain the best results

from each washing and

drying cycle, powder

detergent, rinse aid liquid

and salt should be used.

The detergent

Adding detergent

To open lid A, press button

The detergent should be put

into the two containers C and

If using a tablet, put it in

container "D".

Now you can close the lid:

press it down until you hear

it click.

If it won't close

Check whether there is any

detergent residue on the

edges of the dispenser.

Remove the excess

Rinse aid.

Rinse aid makes dishes

sparkle more as it improves

their drying. The rinse aid

container is situated on the

inside of the appliance door,

you should refill it when light

“D” indicates that it is empty.

(If your dishwasher is fitted

with a “low rinse aid”

indicator light, fill the

container up when the

indicator light flashes or

lights up).

Filling the rinse aid

container.

To open the dispenser, turn

cap C anticlockwise. Take

care when you pour in the

rinse aid to avoid it

overflowing. You can

regulate the amount of rinse

aid used by the dishwasher,

move the adjuster F which

you will find under lid C.

You can choose from six different

positions. It is normally set to 4.

- The amount of rinse aid

needs to be increased if

the dishes appear dull or

you can see circular stains.

- The amount of rinse aid

needs to be reduced if the

dishes are sticky or you

can see white streaks.

Warning

Three-in-one dishwasher tablets are now available on the market, and combine detergent, salt and rinse aid all in one.

If the water in your area is hard or very hard, we still recommend you pour extra salt into the relevant dispenser to prevent the

formation of white streaks on your dishes or on the interior of the appliance.

Using a three-in-one product means it is no longer necessary to put rinse aid into the relevant container.

If you want to achieve perfectly dry dishes, you may add rinse aid as long as the dosage adjuster is set to no.2.

In any case, please read the manufacturer's instructions on the packet.

If you use only these products, it is normal for the salt and rinse aid indicator lights to flash permanently after a certain number of

cycles.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Commentaires sur ces manuels

Pas de commentaire

Hotpoint BFI620 Mode d'emploi Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Lave-vaisselle Hotpoint BFI620