Hotpoint DF55 Manuel d'utilisateur télécharger pdf (Page 22)

Important Information...

Going Away:

If the appliance is not going to be used for

some time carry out the following:

● Run the pre wash programme, twice in

succession.

●

Switch of at the electrical socket and

unplug.

●

Turn off the water supply tap,

disconnect the intake hose and allow to

drain.

● Fill the rinse aid dispenser.

● Leave the door open, to prevent any

unpleasant odours inside the

dishwasher.

Before using the dishwasher after a long

break, plug in and switch on at the electrical

socket. Reconnect the intake hose and turn

on the water supply tap. Check there are no

deposits or rust inside the water pipe, if

there are allow water to run from the water

supply tap for a few minutes.

Disconnecting the Dishwasher...

When disconnecting the appliance it is

important that tasks are carried out in the

correct sequence:

- Switch off at the mains and remove the

plug from the socket.

- Turn off the water supply.

- Disconnect drain and water intake hose.

- Pull out the appliance, carefully,

withdrawing hoses at the same time.

Transporting the Dishwasher...

Drain water from the dishwasher.Secure all

loose parts. Only transport in an upright

position.

- If not kept upright during transport,

any water remaining inside, may seep

into the control module and cause

subsequent errors with programme

functions.

CE marking certifies that this appliance

conforms to the following EEC directives:

Low Voltage Equipment 72/23/EEC

Electromagnetic Compatibility 89/336/EEC

and subsequent modifications.

22

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Commentaires sur ces manuels

Pas de commentaire