Hotpoint FDDSN 11010 P Mode d'emploi télécharger pdf (Page 7)

•  If fitting an under sink waste

disposal unit, cut out the membrane,

bung or blanking plug.

Ensure the drain hose is securely attached, to prevent it

coming away while the machine is in use and causing a flood.

Fit hose to waste securely using a “Jubilee” type clip.

Anti-flooding protection*

To ensure floods do not occur, the dishwasher:

- is provided with a special system which blocks the water supply

in the event of anomalies or leaks from inside the appliance.

Some models are also equipped with the supplementary safety

device New Acqua Stop

*, which guarantees anti-flooding

protection even in the event of a supply hose rupture

WARNING: HAZARDOUS VOLTAGE!

Undernocircumstanceshouldthewaterinlethosebe

cut as it contains live electrical parts.

TheCompanyshallnotbeheldresponsibleforanyincidents

that occur if these regulations are not observed

Advice regarding the first wash cycle

After the installation, remove the stoppers from the racks and the

retaining elastic elements from the upper rack, if any.

Immediately before the fist washing, completely fill the salt

dispenserwithwaterandaddonlythenapproximately1kgofsalt

(seechapterentitledRinseaidandrefinedsalt)

. The water may

overflow: this is normal and is not a cause for concern. Select

the water hardness value

(seechapterentitledRinseaidand

refined salt).

- After the salt has been poured into the machine,

theLOWSALTindicatorlight* switches off.

If the salt dispenser is not filled, the water softener and the

heating element may get damaged as a result.

The control panel features a “Touch Control” system;

press the symbols lightly with your fingertips to activate

the command.

The machine has a buzzer/set of tones

(depending on the

dishwasher model

) to inform the user that a command has

been implemented: power on, cycle end etc.

The symbols/indicator lights/LEDs on the control panel/

display may vary in colour and may have a flashing or fixed

light

(depending on the dishwasher model)

The display provides useful information concerning the

type of wash cycle, wash cycle phase, remaining time,

temperature etc.

SETTINGS button

This button makes it possible to select:

logo display, volume of buzzer/set of tones, language

selection, rinse aid adjustment, water hardness adjustment,

control panel lock.

Selecting the language

SwitchonthemachineusingtheON/OFFbuttonandselectthe

desired language using the buttons next to the grey arrows

(the

default language is English.)

PresstheOKbuttontoconfirmtheselection.

PresstheESCbuttontoexitorwaitafewseconds.

Child safety lock

The control panel lock can be activated when the

dishwasher is switched on or when a cycle is in progress using

the “Lock” button. Press again to deactivate the function.

Use the SETTINGS button to access the menu. The control

panellockcanbeactivatedautomaticallyafter10/30seconds

from the cycle start.

* Onlyavailableinselectedmodels.

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Commentaires sur ces manuels

Pas de commentaire

Hotpoint FDDSN 11010 P Mode d'emploi Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Lave-vaisselle Hotpoint FDDSN 11010 P