Hotpoint HSFO 3T223 W UK Guide de l'utilisateur télécharger pdf (Page 4)

OPTIONS AND FUNCTIONS

OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).

If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED ashes rapidly 3 times

and beeps will sound. The option will not be enabled.

TABLET (Tab)

This setting allows you to optimize the performance of the

program according to the type of detergent used.

Press the TABLET button (the indicator light will light up / the

corresponding symbol will light up) if you use combined

deter-

gents in tablet form (rinse aid, salt and detergent in 1 dose).

If you use powder or liquid detergent, this option should

be o.

KEYLOCK

A long press (for 3 seconds) of SHORT TIME button, will activate

the KEYLOCK function. The KEYLOCK function will block the

control panel except the ON/OFF button. To deactivate the

KEYLOCK, long press again.

DELAY

The start of the program may be delayed for a period of time

between 0:30 and 24 hours.

1. Select the program and any desired options. Press the

DELAY button (repeatedly) to delay the start of the program.

Adjustable from 0:30 to 24 hours. With each press of the

button, the delay start increases by: 0:30 if selection below

4 hours, 1:00 if selection is below 12 hours, 4 hours if

selection is above 12 hours. If 24 hours reached, and the

button is pressed, the delayed start is deactivated.

2. Press the START/PAUSE button: the timer will begin

counting down;

3. Once this time has elapsed, the indicator light switches o

and the program begins automatically.

If at the time of the countdown the START/PAUSE button is

pressed again the DELAY option is cancelled and the selected

program starts automatically.

The DELAY function cannot be set once a program has

been started.

WATER TAP CLOSED – Alarm

Flashes when there is no inlet water or water tap is closed.

DRAIN OUT

To stop and cancel the active cycle, the Drain Out function

can be used.

A long press of START/PAUSE button, will activate the DRAIN

OUT function. The active program will be stopped and the

water in the dishwasher will be drained out.

ZONE WASH 3D

Option works with one rack at once. In particular, we

recommend to use it with Normal and Intensive cycles - thanks

to the additional 3D water jets placed on the bottom o the

cavity, ZONE WASH 3D option allows to save energy or to

increase the washing performance of the dishwasher:

• ZONE WASH 3D + NORMAL CYCLE: it allows to reduce energy

consumption up to 40%.

• ZONE WASH 3D + INTENSIVE CYCLE: it increases the washing

performances up to 40%. Ideal for very soiled mixed loads,

e.g. pans and saucepans, dishes with heavy encrustation

or dicult-to-clean crockery (grater, vegetable mill, dirty

cutlery).

How to activate the option:

1. Select a compatible cycle

2. By default the appliance washes dishes in all racks. To wash

only the specic rack, press this button repeatedly:

shown on the display (only lower rack)

shown on the display (only upper rack)

shown on the display (option is OFF and the appliance will

wash dishes in all racks).

Remember to load the upper or lower rack only, and to

reduce the amount of detergent accordingly.

SHORT TIME

This option can be used to reduce the duration of the main

programs while maintaining the same washing and drying

performance levels.

After selecting the program, press the SHORT TIME button and

the indicator light will switch on. To deselect the option, press

the same button again.

EXTRA DRY

To improve the drying of the dishes, after selecting the

program, press the EXTRA DRY button and the indicator light

comes on.

A higher temperature during the nal rinse and an extended

drying phase allow for improving drying. To deselect the

option, press the same button again. The EXTRA DRY option

results in the lengthening of the wash cycle.

1 2 3 4 5 6 7 8

Commentaires sur ces manuels

Pas de commentaire

Hotpoint HSFO 3T223 W UK Guide de l'utilisateur Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Lave-vaisselle Hotpoint HSFO 3T223 W UK