Hotpoint LTB 6M116 C TW 60HZ Mode d'emploi télécharger pdf (Page 11)

Detergent and

dishwasher use

* Only available in selected models.

Measuring out the detergent

A good wash result also depends on the correct

amount of detergent being used. Exceeding the stated

amount does not result in a more effective wash and

increases environmental pollution.

Based on how soiled the items are, the amount can be

adjusted to individual cases using powder or liquid

detergent.

In the case of normally soiled items, use approximately either

35 gr (powder detergent) or 35 ml (liquid detergent). If tablets

are used, one tablet will be enough.

If the crockery is only lightly soiled or if it has been rinsed

with water before being placed in the dishwasher, reduce

the amount of detergent used accordingly.

For good washing results also follow the instructions shown

on the detergent box.

For further questions please ask the detergent producers.

To open the detergent dispenser use the opening device “A”.

Introduce the detergent into the dry dispenser “B” only.

Place the amount of detergent for pre-washing directly

inside the tub.

1. When measuring out the detergent refer to the Table of wash

cycles to add the proper quantity. Compartment B comprises a

level showing the maximum quantity of liquid or powder detergent

that can be added to each cycle.

2. Remove detergent residues from the edges of the dispenser

and close the cover until it clicks.

3. Close the lid of the detergent dispenser by pulling it up until

the closing device is secured in place.

The detergent dispenser automatically opens up at the right time

according to the wash cycle.

If all-in-one detergents are used, we recommend using the TABS

option, because it adjusts the cycle so that the best washing and

drying results are always achieved.

Only use detergent which has been specifically designed

for dishwashers.

DO NOT USE washing up liquid.

Using excessive detergent may result in foam residues

remaining in the machine after the cycle has ended.

To achieve the best washing and drying results, the combined

use of detergent, rinse aid liquid and refined salt is required.

We recommend using detergents that do not contain

phosphates or chlorine, as these products are

harmful to the environment.

Starting the dishwasher

1. Turn the water tap on.

2. Open the door and press the ON/OFF button.

3. Measure out the detergent.

(see adjacent information).

4. Load the racks (

see Loading the racks

5. Select the wash cycle in accordance with the type of crockery

and its soil level

(see Table of wash cycles)

by pressing the P

button.

6. Select the wash options

(see Special wash cycles and

Options)

7. Start the wash cycle by shutting the door.

8. The end of the wash cycle is indicated by beeps and by the

flashing of the indicator light of the selected wash cycle. Open

the door, switch off the appliance by pressing the ON/OFF

button, shut off the water tap and unplug the appliance from

the electricity socket.

9. Wait a few minutes before removing the crockery in order to

avoid burns. Unload the racks, beginning with the lower level.

- The machine will switch off automatically during

long periods of inactivity in order to minimise

electricity consumption.

AUTO WASH CYCLES*: some models of dishwasher are

equipped with a special sensor which can be used to assess

the level of soiling and automatically select the most efficient and

economic wash cycle accordingly.

The duration of the auto wash cycles may vary due to the

operation of the sensor.

If the crockery is only lightly soiled or if it has been rinsed

with water before being placed in the dishwasher, reduce the

amount of detergent used accordingly.

Changing a wash cycle in progress

If a mistake was made in the wash cycle selection process, it

is possible to change the cycle provided that it has only just

begun: open the door, taking care to avoid the escaping steam,

and press and hold the ON/OFF button; the machine will switch

off. Switch the machine back on using the ON/OFF button and

select the new wash cycle and any options desired; start the

cycle by closing the door.

Adding extra crockery

Without switching off the machine, open the door, taking care

to avoid the escaping steam, and place the crockery inside the

dishwasher. Close the door: the cycle starts from the point at

which it was interrupted.

Accidental interruptions

If the door is opened during the wash cycle or there is a power

cut, the cycle stops. It starts again from the point at which it

was interrupted once the door has been shut or the electricity

supply restored.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire

Hotpoint LTB 6M116 C TW 60HZ Mode d'emploi Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Lave-vaisselle Hotpoint LTB 6M116 C TW 60HZ