Hotpoint SI C40 DLBL H Mode d'emploi télécharger pdf (Page 23)

2323

 the iron switches off automatically after 10

minutes when left unattended in the rest position

(vertical).



green light and an acoustic signal is emitted to inform

that the automatic stand-by function is active.

Simply move the iron or press the temperature buttons



Wait until the display becomes red before starting

ironing again.

Automatic switch-off

function (H

)

The automatic switch-off function guarantees total

safety.

This function automatically switches off the iron when



 the iron switches off automatically after 30

seconds when left unattended in the ironing



 the iron switches off automatically after 10

minutes when left unattended in the rest position

(vertical).

If you leave the iron unattended an acoustic signal is

emitted to inform that the automatic switch-off function

is active.



Wait until the temperature indicator light turns off

before starting ironing again.

CLEANING AND MAINTENANCE

After use (I)

1. Set the steam regulator (3) to Off, disconnect the



the iron cool down.

2. Empty the water reservoir (9).

3. Wind the cord around the cable winder (6) and

store the iron in vertical position, in a dry safe

place.

Never store the iron in horizontal position. Always

use the stand at the back of the iron.

Cleaning (J)

Never use aggressive and/or abrasive substances

to clean the plastic parts and the iron soleplate.

2. Select the recommended ironing temperature

with the temperature control (4b) (see step B

and chapter “Using the iron”, section “Selecting

the temperature and adjusting the steam”).

3. Press the shot of steam button (1) to obtain

        

of steam function has not been used for some

time, it may be necessary to press the button

repeatedly to activate the pump.

FEATURES

Spray function (F)

The spray function is used to dampen the garment in

      

use the spray function both in no-steam and steam

ironing mode at any temperature.

1.         

higher than ¼.

2. With the iron in horizontal position, press the

spray button (2) to dampen the garment.

Vertical steam function (G)

The vertical steam function is useful to eliminate

      

can use this function by simply placing the iron in

vertical position. All functions of the appliance will

remain unchanged also in this position (refer to

chapter “Use” according to the model).

Do not direct steam towards people or animals

and do not iron garments while worn.

Anti-drip function

The iron is provided with anti-drip function in order to

automatically interrupt the steam distribution when the

temperature is too low, thus preventing water dripping

out of the soleplate.

Do not use steam with low temperatures (see

chart in step B

and B

, chapter “Using the iron”,

according to the type of iron you are using).

Automatic Stand-by