Hotpoint AKZ 650/IX Mode d'emploi télécharger pdf (Page 10)

Lift the bottom of the inside sheet of glass and remove it

(fig. 6)

Slip out the second and the third sheet of glass, paying

particular attention to the position of the word

SAFEGLASS (Fig. 7)

Refit the sheets of glass in reverse order making sure that:

- The word SAFEGLASS on the intermediate sheets is

facing upwards so as to be correctly legible (fig. 8);

- if one of the intermediate sheets does not have the word

SAFEGLASS it must be inserted in the position closest to

the internal glass.

Put the inside glass into position with the word SAFEGLASS

facing the top of the door. (fig. 6)

Reposition and screw on the two glass supports A (fig. 4 and

fig. 5)

Note: a slight play between the inside glass and the door

uprights is to be considered normal as it compensates

expansion of the glass caused by heat.

To remount the door:

Insert the hinges into their grooves and lower the door

fully (fig. 3)

Lower the two catches again (fig. 2)

Close the oven door fully.

31002017GB.fm Page 25 Tuesday, December 2, 2008 5:13 PM

1 2 ... 5 6 7 8 9 10 11 12

Pas de commentaire

Hotpoint AKZ 650/IX Mode d'emploi Page 10