Hotpoint AKZ 669/IX/03 Mode d'emploi télécharger pdf (Page 3)

•

For ovens installed under the worktop, leave a minimum clearance of 5 mm between the upper edge

of the oven and the lower edge of the worktop (fig. 5). For correct operation of the appliance, this

clearance must always be unobstructed.

•

If the kitchen unit is not securely fixed to the wall, it must be anchored with standard brackets (A)

(fig. 6).

Electrical connection

Regulations require that the appliance be earthed.

•

Connection to the mains must be carried out by a qualified technician in accordance with the

manufacturer's instructions and in compliance with local regulations.

•

The installer is responsible for connecting appliances correctly to the mains and for observing the safety

regulations.

•

The oven power cable must be long enough to connect the built-in oven to the mains.

•

Observance of safety directives requires that a multi-pole switch with a minimum contact gap of 3 mm

be used for the installation.

•

Do not use multiple plug adapters or extension leads.

•

After the oven has been installed, the electrical components must be inaccessible.

31055023aGB.fm Page 18 Monday, July 31, 2006 5:59 PM

1 2 3 4 5 6 7 8 ... 11 12

Pas de commentaire

Hotpoint AKZ 669/IX/03 Mode d'emploi Page 3