Hotpoint BL31 Manuel d'utilisateur télécharger pdf (Page 12)

Caring for your Integrated Larder Fridge

Cleaning your Integrated Larder Fridge

It is a good idea to clean the inside of your

Larder Fridge regularly. Always switch off at

the socket outlet and pull out the mains

plug first.

Remove any food.Wipe out the inside of the

Larder Fridge using a clean cloth wrung out in

either a solution of one teaspoon of

bicarbonate of soda to one pint of water,or

Milton diluted according to the

manufacturer’s instructions.

The complete interior including the door,and

removable parts,should be washed with care

ensuring that the cloth does not become

caught on any part of the appliance.Never

use any household cleaner or detergent,

abrasive powders or wax polish.These not

only damage the surfaces,but also leave a

smell in the Larder Fridge.Make sure that no

particles of food are left in the interior gutter.

If the drain hole becomes blocked it may be

cleared by pushing the end of a pipe cleaner

or drinking straw through the drain hole and

gently moving it up and down.The rubber

door seal must be cleaned with soap and

water only as a detergent will damage it.

Automatic defrosting

The refrigerator requires no defrosting,since

the ice at the rear wall melts automatically

when the compressor is off and water slides

downwards through the hole in the rear wall.

This is collected in a receptacle placed at the

bottom of the appliance.

Going Away

If you expect to be away for any length of

time and don’t want to use your Larder Fridge,

switch off at the power point and pull out the

plug.Remove all food and wipe out the

interior.Always leave the door ajar to prevent

the accumulation of odours.

How to Replace the Interior Light

Should the light fail to work,switch off at the

power point and pull out the plug.Remove

the shelves to make access easier.Access to

the bulb is from the rear of the cover(arrow 1)

and remove the cover in the direction of

(arrow 2).

Unscrew the old bulb.Screw the new bulb

securely into the holder.Replace the plug in

the power point and switch on.If the light

fails to work,do not worry,it will not affect the

working of your Larder Fridge.Obtain a

replacement (max 15 watt 220-240V

alternating current,E14 lampholder) from

your nearest Spares Centre and replace the

old bulb.

12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire