Hotpoint BL31 Manuel d'utilisateur télécharger pdf (Page 4)

Installing Your Integrated Appliance

Please read through this section before

starting any work.

The installation location should be in a dry,

well ventilated room.The appliance should

not be exposed to direct sunlight and should

not be near a heat source (e.g.a radiator,

cooker).If required,use an insulating plate.

Warning!

The appliance contains the environmentally

friendly but flammable refrigerant R600a.

Ensure that the refrigerant circuit is NOT

damaged during transportation and

installation.

Leaking refrigerant may ignite or cause eye

injuries.

The more refrigerant in an appliance,the

larger the room must be in which the

appliance is situated.If a leak occurs in a room

which is to small,a flammable gas-air mixture

may form.

The room must be at least 1 m

3

per 8g of

refrigerant.The amount of refrigerant in

your appliance is indicated on the rating

plate located inside the appliance,on the

bottom left hand side.

If refrigerant is leaking out:

● Avoid naked flames and ignition sources

near the installation location.

● Unplug the appliance and thoroughly

ventilate the room for several minutes.

Installation of the appliance under the

worktop

Although you will need to provide all tools

required for the installation,all fittings are

supplied with the appliance.

4

1 2 3 4 5 6 7 8 9 ... 19 20

Commentaires sur ces manuels

Pas de commentaire