Hotpoint DE47X Mode d'emploi télécharger pdf (Page 13)

Note: If your appliance has two ovens: When the

timer has been set for one oven it is possible to

use the other oven

only during the same

Automatic programme.

At the end of the Automatic

Cook Period the Auto Symbol

will flash and an intermittent

bleeping sound will be heard.

The audible tone will continue

unless cancelled.

The 'Auto' symbol will continue to flash until the

timer is returned to Manual operation (see below).

Step 8 Press the Manual

button, the audible tone will be

cancelled and the oven(s) will be

returned to Manual.

Step 9 Turn the oven control(s) to the OFF position.

Note 1 When cooking automatically the Cook Period

can be checked at any time by simply pressing

the Cook Period button.

Note 2 When cooking automatically the End Time can

be checked at any time by simply pressing

the End Time button.

b) TO SET TIMER TO SWITCH ON

IMMEDIATELY AND OFF AUTOMATICALLY

AFTER A SET COOK PERIOD

Step 1 Check that the correct time of day is set, if

not follow instructions for setting the time

of day.

Step 2 Place food onto the correct shelf position

in the oven and close the oven door(s).

Step 3 Turn the oven control(s) to the required tem-

perature, and if necessary select the

appropriate oven function.

Step 4 Press & hold in the

Cook Period button, the display

will read 0.00 and the 'cookpot'

symbol will light up.

With the Cook Period button still

held in set the required Cook

Period using the "+" and "-"

buttons. Example: 1hr 30

minutes (as shown).

Step 5 Release all buttons.

The timer display will revert to

the time of day with the 'Auto'

symbol lit & 'cookpot' symbol

remaining lit.

At the end of the Cook Period

the 'Auto' symbol will flash and

an intermittent audible tone will

be heard. The audible tone will

continue until cancelled. The

'Auto' symbol will continue to

flash until the timer is returned to

Manual operation (see below).

Step 6 Press the Manual

button. The audible tone will be

cancelled and the oven(s) will be

returned to Manual.

Step 7 Turn the oven control(s) to the OFF position.

TO CANCEL AN AUTO COOKING

PROGRAMME BEFORE THE COOK

PERIOD HAS FINISHED.

Step 1 Turn the oven control to the OFF position.

Step 2 Press the Manual

button to return the oven to

"Manual" operation. The 'Auto'

symbol will go out.

Note 1 When cooking automatically the Cook

Period can be checked at any time by simply

pressing the Cook Period button.

OTHER NOTES ON TIMER OPERATION

1. When cooking Automatically the Cook Period can

be checked at any time simply by pressing the

Cook Period button.

2. When cooking Automatically the End Time can be

checked at any time by simply pressing the End

Time button.

3. Having set a Cook Period and End Time an

electronic device stores the information. The device

within the timer will switch the oven(s) on and off at

the required times.

4. When setting an Auto Cooking Programme and a

mistake is made, to clear:-

(a) Press & release the Manual button.

(b) Start the sequence again.

5. If at any time the display shows three flashing zero's

0.00 and 'Auto', it is likely that the electricity supply

to the oven has been interrupted. Reset the timer

to the correct time of day.

Food in the oven may,

therefore, not have been cooked, before serving

check food is thoroughly heated and completely

cooked.

6. To set each function always press and hold the

required function button and at the same time press

"+" or "-" buttons.

6120

130

4120

6120

NOTE: The Cookpot symbol disappears

6120

5100

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 47 48

Commentaires sur ces manuels

Pas de commentaire

Hotpoint DE47X Mode d'emploi Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Non Hotpoint DE47X