Hotpoint H8 A3E I H O3 Guide de l'utilisateur télécharger pdf (Page 3)

ALARM TYPE Signal Cause Cure

Door open

alarm

The acoustical alarm is activated

and the Alarm Indicator blinks.

The Fridge and or Freezer door has

remained open for more than 2

minutes.

Close the door or press the Stop

Alarm to mute the acoustical

alarm.

Temperature

alarm

The Temperature display blinks (°C)

and the Alarm Indicator remains on.

The inside temperature is not

adequate.

Press the Stop Alarm button ;

the acoustical alarm stops, the

Temperature Display (°C) blinks

and the Alarm Indicator remains

on until a temperature < -10°C is

reached.

Long black-

out alarm

The Black Out Alarm icon remains

on, the Alarm indicator blinks

and the Temperature display (°C)

blinks, showing the maximum

temperature reached during

blackout.

Prolonged power failure, able to

cause the inside temperature to

increase to 0°C.

Press the Stop Alarm button; the

acoustical alarm stops.

Malfunction The letter “F” blinks on the display

(°C).

Product malfunction. Contact the After-sales Service.

DAILY USE

FUNCTIONS

ALARM TABLE

ON/STANDBY

To put the product in Stand-by, press and hold the On/

Stand By button for 3 seconds. All the indicators turn o

except On/Standby indicator.

Press again to reactivate the appliance.

FRIDGE TEMPERATURE

To adjust the Fridge Temperature, press the Fridge

Temperature button. The Fridge Temperature can be

adjusted between +2°C and + 8°C, as shown by the FRIDGE/

FREEZER TEMPERATURE DISPLAY (°C)

FREEZER TEMPERATURE

To adjust the Freezer Temperature, press the Freezer

Temperature button. The FreezerTemperature can be

adjusted between -16°C and -24°C, as shown by the FRIDGE/

FREEZER TEMPERATURE DISPLAY (°C) .

SUPER FREEZE

The use of this function is recommended when placing a very

high quantity of food to be frozen in the freezer compartment.

24 hours before freezing fresh food, press the Super Freeze

button to activate the Super Freeze function. When activated,

the Super Freeze indicator turns on.

After 24 hours place the food to be frozen in the middle

freezing zone of freezer compartment. The function is

automatically disabled after 48 hours, or can be manually

disabled by pressing Super Freeze button.

ACTIVE OXYGEN

Press the Active Oxygen button to activate/deactivate the

feature. Use this feature to reduce unpleasant odours and

preventing build-up bacteria.

See Use and Care Guide for more details on functions /

see last page for information on how to obtain the Use and Care

Guide

COOLSAVER

Coolsaver avoids cross transfer of odors and provides an ideal

environment in your refrigerator.

SUPER COOL

Using Super Cool function it is possible to increase the cooling

capacity in the refrigerator compartment. The use of this

function is recommended when placing a very high quantity

of food in the refrigerator compartment. Press the Super Cool

button to activate Super Cool function. When activated, the

Super Cool indicator turns on. The function is automatically

disabled after 6 hours, or can be manually disabled by pressing

Super Cool button again.

REFRIGERATOR LIGHT

The light system inside the refrigerator compartment uses

LEDs light, allowing a better lightning as well as a very low

energy consumption.

If the LED light system does not work, please contact the

Service to replace it.

Important: The refrigerator compartment light switches

on when the refrigerator door is opened. If the door is kept

open for more then 10 minutes the light will be automatically

switched o.

FAN

The Fan improves temperature distribution inside the

refrigerator compartment, allowing better preservation of

stored food.

1 2 3 4

Commentaires sur ces manuels

Pas de commentaire

Hotpoint H8 A3E I H O3 Guide de l'utilisateur Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Non Hotpoint H8 A3E I H O3