Hotpoint SH 103 P X S Mode d'emploi télécharger pdf (Page 13)

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

Automatic cleaning with the FAST CLEAN

function

With the FAST CLEAN mode, the internal temperature of the

oven reaches 500°C. The pyrolytic cycle is activated, burning

away food and grime residues. Dirt is literally incinerated.

Keep children away from the appliance during the automatic

cleaning cycle as surfaces may become very hot. Particles

may ignite inside the oven as a result of the combustion

process. There is no cause for concern: this process is both

normal and hazard-free.

Before initiating the FAST CLEAN mode:

• clean the oven door;

• remove large or coarse food residues from the inside of

the oven using a damp sponge. Do not use detergents;

• remove all accessories and the sliding rack kit (where

present);

• do not place tea towels or pot holders over the oven

handle.

! If the oven is too hot, the pyrolytic cycle may not start.

Wait for the oven to cool down.

! The programme may only be started once the oven door

has been closed.

To activate the Fast Clean programme:

1. Switch the control panel on by pressing the button.

2. Press the button; the TIME display will show the default

duration of 1:30 h (normal cycle), while he TEMPERATURE

display will show “Piro” and “nor” alternately;

3. The desired cleaning level can be selected by pressing

the button, then:

- pressing to switch to the intensive cycle: the duration is

2 h and the TEMPERATURE display shows the text “Piro”

and “int” alternately;

- pressing to switch to the economy cycle: the duration is

1 h and the TEMPERATURE display shows the text “Piro”

and “eco” alternately.

Safety devices

• the door locks automatically as soon as the temperature

reaches a high value; the icon lights up on the

display;

• pressing the button cancels the cleaning cycle t any

time;

• if a malfunction occurs, the heating elements will be

switched off;

• once the oven door has been locked, you cannot change

the duration and end time settings.

Programming delayed automatic cleaning

! Programming is possible only after selecting the FAST

CLEAN mode.

1. Press the button and set the end time using the

and buttons.

2. Once you have reached the desired end time, press the

button again.

3. Press the button to activate the programmed mode.

4. When the selected time has elapsed, “END” appears on

the TEMPERATURE display and a buzzer sounds.

• For example: it is 9:00 a.m. and the Economy (ECO)

FAST CLEAN level has been selected, with the default

duration of 1 hour. 12:30 is scheduled as the end time.

The programme will start automatically at 11:30 a.m.

The icons and ash to indicate that programming

has taken place. After programming, in the time before the

Fast Clean mode starts, the TIME display indicates the

duration and end of the Fast Clean mode alternately.

To cancel programming press the button.

Once the automatic cleaning cycle is over

Before you can open the oven door, you will have to wait

for the icon to switch off: this indicates the oven

temperature has dropped to an acceptable level. You will

notice some white dust deposits on the bottom and the sides

of your oven; remove these deposits with a damp sponge

once the oven has cooled down completely. Alternatively,

you can make use of the already heated oven, in which

case it is not necessary to remove the deposits, they are

completely harmless and will not affect your food in any way.

1 2 ... 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire

Hotpoint SH 103 P X S Mode d'emploi Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Non Hotpoint SH 103 P X S