Hotpoint SX 1046L PX S Mode d'emploi télécharger pdf (Page 17)

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

! Do not touch the light bulb directly with your hands.

! Do not use the oven lamp as/for ambient lighting.

Sliding rack kit assembly

To assemble the sliding

racks:

1. Remove the two frames,

lifting them away from the

spacersA(seegure).

2. Choose which shelf to use

with the sliding rack. Paying

attention to the direction in

which the sliding rack is to

beextracted,positionjointB

and then joint C on the

frame.

3. Secure the two frames

with the guide rails using the

holes provided on the oven

walls (see diagram). The

holes for the left frame are

situated at the top, while the

holes for the right frame are

at the bottom.

4. Finally, t the frames on

the spacers A.

! Do not place the sliding racks in position 5.

Automatic cleaning by PYROLYSIS

The cleaning cycle can cause the internal temperature of

the oven to reach 500°C. The pyrolytic cycle is activated,

burning away food and grime residues. Dirt is literally

incinerated.

Keep children away from the appliance during the automatic

cleaning cycle as surfaces may become very hot. Particles

may ignite inside the oven as a result of the combustion

process. There is no cause for concern: this process is both

normal and hazard-free.

Before initiating the PYROLYTIC cycle:

• cleantheovendoor;

• removelargeorcoarsefoodresiduesfromtheinsideof

theovenusingadampsponge.Donotusedetergents;

• removeallaccessoriesandtheslidingrackkit(where

present);

• do not place tea towels or pot holders over the oven

handle.

Left

guide rail

Right guide

rail

Direction

of extraction

! If the oven is too hot, the pyrolytic cycle may not start.

Wait for the oven to cool down.

! The programme may only be started once the oven door

has been closed.

To activate the cleaning cycle

1. Press to switch on the control panel.

2. Press the icon.

3. Scroll through the menu commands using the control

dial, select PYROLYTIC and press

4.Theappliancesuggestsa“NORMAL”pyrolyticcycle,with

a duration of 1 hour 30 minutes. Other levels of cleaning

may be selected.

• Usethecontroldialtoselectoneofthefollowing:

 - “ECONOMY”:duration1hour

 - “NORMAL”:duration1hourand30minutes

 - “INTENSIVE”:duration2hours.

 • Press again.

5. Press to begin the PYROLYTIC cycle.

Safety devices

• Thedoorlocksautomaticallyassoonasthetemperature

reachesahighvalue;the icon lights up on the display.

• Pressingthe icon cancels the cleaning cycle at any

time.

• If a malfunction occurs, the heating elements will be

switched off.

• Oncetheovendoorhasbeenlocked,youcannotchange

1 2 ... 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire

Hotpoint SX 1046L PX S Mode d'emploi Page 17

Commentaires sur ces manuels

Produits connexes et manuels pour Non Hotpoint SX 1046L PX S