Hotpoint SX 1046L PX S Mode d'emploi télécharger pdf (Page 8)

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

Setting the clock

To set the clock, switch on the oven by pressing the icon,

then press and follow the steps described.

1. Scroll through the menu commands using the control

dial, select CLOCK and press

2.Adjustthetimeusingthecontroldial.

3. Once you have reached the correct hour value, press

the

icon.

4. Repeat steps 2 and 3 to set the minutes.

5.Toexitadjustmentmode,pressthe icon or use the

control dial to scroll through the menu until you reach EXIT,

then press

! The clock can also be set while the oven is off, by pressing

the

icon and carrying out steps 2 to 4 as described

above.

After the appliance has been connected to the mains, or

after a blackout, the clock will need to be reset.

Setting the minute minder

! The minute minder may be set regardless of whether the

oven is switched on or off. It does not switch the oven on

or off.

When the set time has elapsed, the minute minder emits a

buzzer that will automatically stop after 30 seconds or when

any active button on the control panel is pressed.

Toadjusttheminuteminder,proceedasfollows:

1. Press the icon.

2. Set the desired time using the control dial.

3. Once you have reached the desired value, press the

icon again.

When the oven is switched off, the countdown appears on the

display. When the oven is on, the lit

symbol will remind

you that the minute minder is active.

To cancel the minute minder, press the

icon and use

the control dial to set the time to 00:00. Press again.

The icon will switch off to indicate that the minute minder

has been disabled.

Starting the oven

1. Press to switch on the control panel. The appliance

buzzer sounds three times (ascending).

2. Press the

icon to select the desired manual cooking

mode. The cooking temperature and duration may be set.

Press the

icon to select the desired automatic cooking

mode. The cooking temperature and duration are both

settodefaultvalues.Onlythedurationmaybeadjusted

inaccordancewith the selectedmode.Thetext“AUTO”

appears on the display to indicate that the temperature is

followingaprecisecookingprole.Adelayedcookingcycle

may be programmed.

3. Press

to start the cooking mode.

4. The oven will begin its preheating phase, the preheating

indicators will light up as the temperature rises.

5. When the preheating process has nished, a buzzer

sounds and all the preheating indicator lights show that this

stage has been completed: the food can then be placed in

the oven.

6. During cooking it is always possible to:

-adjustthetemperaturebypressingthe icon, turning the

controldialandconrmingbypressing again (manual

modesonly);

-setthedurationofacookingmode(seeCookingModes);

- stop cooking by pressing the icon. In this case the

appliancestoresthetemperaturemodiedpreviouslyinits

memory(manualmodesonly);

- switch off the oven by pressing the icon for 3 seconds.

7. If a blackout occurs while the oven is already in operation,

an automatic system within the appliance will reactivate the

cooking mode from the point at which it was interrupted,

provided that the temperature has not dropped below a certain

level. Programmed cooking modes which have not yet started

will not be restored and must be reprogrammed (for example:

a cooking mode has been programmed to start at 20:30. At

19:30 a blackout occurs. When the power supply is restored,

the mode will have to be reprogrammed).

! There is no preheating stage for the GRILL mode.

!Neverputobjectsdirectlyonthebottomoftheoven;this

will prevent the enamel coating from being damaged.

! Always place cookware on the rack(s) provided.

Cooling ventilation

In order to cool down the external temperature of the oven,

a cooling fan blows a stream of air between the control

panel and the oven door, as well as towards the bottom of

the oven door. At the beginning of the cleaning cycle, the

cooling fan operates at low speed.

! Once cooking has been completed, the cooling fan

continues to operate until the oven has cooled down

sufciently.

Oven light

The light comes on when a cooking mode starts (if enabled

in the settings menu).

When models featuring LED INSIDE technology begin

cooking, the LEDs on the door light up for improved

illumination of all cooking levels.

Residual heat indicators

Theapplianceisttedwitharesidualheatindicator.When

theovenisoff,the“residualheat”baronthedisplaylights

up to indicate high temperatures inside the oven cavity. The

individual segments of the bar switch off one by one as the

temperature inside the oven falls.

Demo mode

! The appliance will not enter DEMO mode if the language

has not been selected beforehand.

The oven can operate in DEMO mode: all heating elements

are deactivated, and the controls remain operative.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Commentaires sur ces manuels

Pas de commentaire

Hotpoint SX 1046L PX S Mode d'emploi Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Non Hotpoint SX 1046L PX S