Hotpoint Aquarius Range WMS39 Manuel d'utilisateur télécharger pdf (Page 15)

Door Locked Indicator light

The ‘Door Locked’indicator light will come on two seconds after you

press the ‘START’ button and will stay lit throughout the programme. A

short time after the programme has finished the indicator light will go

out and you can then open the door.

Door not closed

The programme will not start if the door is not closed properly, the ‘Door

Locked’ indicator light will be flashing to show this. Please make sure

that the door is properly closed by pushing it until you hear the catch

click.

WARNINGS:

●

Do not try to

open the

door while

the ‘Door

Locked’

indicator light

is on.

●

Do not allow

children to

play with the

machine or

tamper with

the controls.

●

If you stop a

programme

part way

through a

wash or there

is a power

cut, take care

when

opening the

door. The

machine may

contain hot

water.

●

In the unlikely

event of

something

not working

see the

Trouble -

shooting

section.

Progress indicators

‘!’

STOP/CHANGE

programme

Door Locked Indicator Light

OFF position

Wash programmes

PROGRAMMES

AND OPTIONS

On-Off / Selecting a progr

amme

The machine is switched on, by turning the programme selector dial

away from the ‘OFF’ position, to your selected programme. To start the

programme press and release the ‘START’ button.

When the programme has finished return the programme selector dial to

the ‘OFF’ position.

To stop or change a programme

To stop a programme, turn the programme selector dial to ‘!’

(Stop/Change programme) and press the ‘START’ button. As you turn the

programme selector dial, the ‘Wash’ light will flash. The flashing stops

and the ‘Wash’ light will go out when you press ‘START’. The ‘End’ light

will then flash as the machine pumps out water in the drum to a safe

level. When completed, the ‘End’ light stops flashing and after a short

time the ‘Door Locked’ indicator light will go out and the door can be

opened. Caution: the load and the remaining water in the drum may

still be extremely hot.

If you want to change

a programme, turn the programme selector dial to

‘!’ (Stop/Change programme) and press the ‘START’ button. As you turn

the programme selector dial, the ‘Wash’ light will flash. The flashing

stops and the ‘Wash’ light will go out when you press ‘START’. The ‘End’

light will then flash as the machine pumps out water in the drum to a

safe level. When completed, the ‘End’ light stops flashing and you can

then change the programme (you may need to add detergent). Press the

‘START’ button to continue.

If you turn the programme selector dial during a programme, the ‘Wash’

light will flash to show that the programme running is not that shown on

the dial. Turn the dial to the original programme to stop the flashing.

The flashing will stop automatically when the programme enters the

rinse phase.

Progress indicators

These will light up when you choose a programme, to indicate the

progress of the selected programme. When started, the first light

in the cycle will stay lit and as the machine progresses, successive

lights will come on until the programme finishes. The ‘End’ light

will stay lit until you turn the programme selector dial to the ‘OFF’

position or choose another programme or option.

‘START’ button

Programme selector dial

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Hotpoint Aquarius Range WMS39 Manuel d'utilisateur Page 15

Commentaires sur ces manuels

Produits connexes et manuels pour Rondelles Hotpoint Aquarius Range WMS39