Hotpoint WM51 Manuel d'utilisateur télécharger pdf (Page 4)

1. Choose a Location...

The choice of location for your appliance will influence its performance.

●

Position where possible on a solid floor. Vibration may occur with a wooden floor.

●

Take care with vinyl floor coverings.The weight of the appliance may cause indentations in

some vinyl floor coverings.

●

For your safety and to comply with IEE regulations, you should not install your appliance in a

bath or shower room.Seek professional advice if you wish to do so.

●

Ensure sufficient space is allowed for the appliance.The dimensions should be a

minimum of 600 mm wide, 600 mm deep and 900 mm high.

●

Ensure the electrical socket and water taps are easily accessible and that the water

supply can be isolated if necessary.

Follow these 5 steps for a trouble free installation:

1. Choose a Location...

2. Remove Transit Bracket...

3. Connect to the Water Supply...

4. Connect to a Drainage System...

5. Adjust the Feet...

Installation Instructions

IMPORTANT INFORMATION:

●

Do not plug in and switch appliance on at the mains until installation is complete.

●

You may be charged for a service call if a problem with your appliance is caused

by incorrect installation or misuse.

1 2 3 4 5 6 7 8 9 ... 19 20

Pas de commentaire

Hotpoint WM51 Manuel d'utilisateur Page 4