Hotpoint WMD 940 K (UK) Mode d'emploi télécharger pdf (Page 8)

Running a wash cycle

1. SWITCH THE MACHINE ON. Press the On/Off

button

; the text HELLO will appear on the

display and the START/PAUSE indicator light will

flash slowly in a green colour.

2. LOAD THE LAUNDRY. Open the porthole door.

Load the laundry, making sure you do not exceed

the maximum load value indicated in the table of

programmes on the following page.

3. MEASURE OUT THE DETERGENT. Open the

detergent dispenser drawer and pour the

detergent into the relevant compartments as

described in "Detergents and laundry".

4. CLOSE THE DOOR.

5. SELECT THE WASH CYCLE. Press one of the

WASH CYCLE SELECTOR buttons to select the

required wash cycle; the name of the wash cycle

will appear on the display. A temperature and spin

speed is set for each wash cycle; these may be

adjusted. The duration of the cycle will appear on

the display.

6. CUSTOMISE THE WASH CYCLE. Use the

relevant buttons:

Modifying the temperature and/or

spin speed. The machine automatically selects

the maximum temperature and spin speed set

for the selected wash cycle; these values cannot

therefore be increased. The temperature can be

decreased by pressing the

button, until the

cold wash "OFF" setting is reached. The spin

speed may be progressively reduced by pressing

the

button, until it is completely excluded (the

"OFF" setting). If these buttons are pressed

again, the maximum values are restored.

Setting a delayed start.

To set a delayed start for the selected

programme, press the corresponding button

repeatedly until the required delay period has

been reached. When this option is enabled, the

symbol lights up on the display. To remove the

delayed start function press the button until the

text "OFF" appears on the display.

Modifying the cycle settings.

 Press the button to enable the function; the

indicator light corresponding to the button will

switch on.

 Press the button again to disable the function;

the indicator light will switch off.

 If the selected function is not compatible with

the programmed wash cycle, the indicator light

will flash and the function will not be activated.

 If the selected function is not compatible with

another function which has been selected

previously, the indicator light corresponding to

the first function selected will flash and only the

second function will be activated; the indicator

light corresponding to the enabled function will

remain lit.

 The functions may affect the recommended load

value and/or the duration of the cycle.

7. START THE PROGRAMME. Press the START/

PAUSE button. The corresponding indicator light

will become green, remaining lit in a fixed manner,

and the door will be locked (the DOOR LOCKED

symbol will be on). During the wash cycle, the

name of the phase in progress will appear on the

display. To change a wash cycle while it is in

progress, pause the washing machine using the

START/PAUSE button (the START/PAUSE indicator

light will flash slowly in an orange colour); then

select the desired cycle and press the START/

PAUSE button again.

To open the door while a cycle is in progress,

press the START/PAUSE button; if the DOOR

LOCKED

symbol is switched off the door may

be opened. Press the START/PAUSE button again

to restart the wash cycle from the point at

which it was interrupted.

8. THE END OF THE WASH CYCLE. This will be

indicated by the text "END OF CYCLE" on the

display; when the DOOR LOCKED

symbol

switches off the door may be opened. Open the

door, unload the laundry and switch off the

machine.

 If you wish to cancel a cycle which has already

begun, press and hold the button. The cycle will

be stopped and the machine will switch off.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire

Hotpoint WMD 940 K (UK) Mode d'emploi Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Machines à laver Hotpoint WMD 940 K (UK)