Hotpoint SI9 891 SC IX Guide d'utilisation et d'entretien télécharger pdf (Page 27)

1. Disconnect the oven from the power supply.

2. Unscrew the cover from the light, replace the bulb

and screw the cover back on the light.

3. Reconnect the oven to the power supply.

Please note: Only use 25-40 W/230 V type E-14, T300 °C

incandescent bulbs, or 20-40 W/230 V type G9, T300 °C

halogen bulbs.

The bulb used in the product is specically designed for

domestic appliances and is not suitable for general room

lighting within the home (EC Regulation 244/2009).

Light bulbs are available from our After-sales Service.

- If using halogen bulbs, do not handle them with your bare

hands as your ngerprints could cause damage. Do not use

the oven until the light cover has been retted.

REPLACING THE LIGHT

1. Remove the shelf guides.

Carefully take the heating element out.

3. Lower the heating element.

4. To reposition the heating element, lift it up,

pulling it slightly towards you, be sure it comes to rest

on the lateral supports.

LOWERING THE UPPER HEATING ELEMENT

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 33 34

Pas de commentaire

Hotpoint SI9 891 SC IX Guide d'utilisation et d'entretien Page 27