Hotpoint SX 1049L CX S Mode d'emploi télécharger pdf (Page 8)

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

Setting the minute minder

! The minute minder may be set regardless of whether the

oven is switched on or off. It does not switch the oven on

or off.

When the set time has elapsed, the minute minder emits a

buzzer that will automatically stop after 30 seconds or when

any active button on the control panel is pressed.

To adjust the minute minder, proceed as follows:

1. Press the

icon.

2. Set the desired time using the control dial.

3. Once you have reached the desired value, press the

icon again.

When the oven is switched off, the countdown appears on the

display. When the oven is on, the lit

symbol will remind

you that the minute minder is active.

To cancel the minute minder, press the

icon and use

the control dial to set the time to 00:00. Press again.

The icon will switch off to indicate that the minute minder

has been disabled.

Starting the oven

1. Press to switch on the control panel. The appliance

buzzer sounds three times (ascending).

2. Press the

icon to select the desired manual cooking

mode. The cooking temperature and duration may be set.

Press the

icon to select the desired automatic cooking

mode. The cooking temperature and duration are both

set to default values. Only the duration may be adjusted

in accordance with the selected mode. The text “AUTO”

appears on the display to indicate that the temperature is

following a precise cooking prole. A delayed cooking cycle

may be programmed.

3. Press

to start the cooking mode.

4. The oven will begin its preheating phase, the preheating

indicators will light up as the temperature rises.

5. When the preheating process has nished, a buzzer

sounds and all the preheating indicator lights show that this

stage has been completed: the food can then be placed in

the oven.

6. During cooking it is always possible to:

- adjust the temperature by pressing the

icon, turning the

control dial and conrming by pressing again (manual

modes only );

- set the duration of a cooking mode (see Cooking Modes);

- stop cooking by pressing the

icon. In this case the

appliance stores the temperature modied previously in its

memory (manual modes only);

- switch off the oven by pressing the

icon for 3 seconds.

7. If a blackout occurs while the oven is already in operation,

an automatic system within the appliance will reactivate the

cooking mode from the point at which it was interrupted,

provided that the temperature has not dropped below a certain

level. Programmed cooking modes which have not yet started

will not be restored and must be reprogrammed (for example:

a cooking mode has been programmed to start at 20:30. At

19:30 a blackout occurs. When the power supply is restored,

the mode will have to be reprogrammed).

! There is no preheating stage for the GRILL mode.

! Never put objects directly on the bottom of the oven; this

will prevent the enamel coating from being damaged.

! Always place cookware on the rack(s) provided.

Cooling ventilation

In order to cool down the external temperature of the oven,

a cooling fan blows a stream of air between the control

panel and the oven door, as well as towards the bottom of

the oven door.

! Once cooking has been completed, the cooling fan

continues to operate until the oven has cooled down

sufciently.

Oven light

The light comes on when a cooking mode starts (if enabled

in the settings menu).

When models featuring LED INSIDE technology begin

cooking, the LEDs on the door light up for improved

illumination of all cooking levels.

Residual heat indicators

The appliance is tted with a residual heat indicator. When

the oven is off, the “residual heat” bar on the display lights

up to indicate high temperatures inside the oven cavity. The

individual segments of the bar switch off one by one as the

temperature inside the oven falls.

Demo mode

! The appliance will not enter DEMO mode if the language

has not been selected beforehand.

The oven can operate in DEMO mode: all heating elements

are deactivated, and the controls remain operative.

To activate DEMO mode, switch off the oven and keep

the control dial turned clockwise while pressing

for 10

seconds. A buzzer sounds and the display shows “DEMO”.

To deactivate DEMO mode, keep the control dial turned

anticlockwise while pressing

for 3 seconds. A buzzer

sounds to conrm deactivation.

Restoring the factory settings

The oven factory settings can be restored to reset all

selections made by the user (language, tone, customised

durations, etc…). To carry out a reset, switch off the oven,

then press and hold 6

, and simultaneously

for 6 seconds. Once the restore procedure is complete, a

buzzer will sound. The rst time the

icon is pressed, the

oven will behave as if it is being switched on for the rst time.

Standby

This product complies with the requirements of the latest

European Directive on the limitation of power consumption

in standby mode. If no buttons are pressed for 30 minutes

and the control panel/door lock has not been activated, the

appliance automatically reverts to standby mode. The ECO

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Commentaires sur ces manuels

Pas de commentaire

Hotpoint SX 1049L CX S Mode d'emploi Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Non Hotpoint SX 1049L CX S