Hotpoint FDIS 11210 P Mode d'emploi télécharger pdf (Page 11)

Wash cycles

Wash-cycle data is measured under laboratory conditions according to European Standard EN 50242.

Based on the different conditions of use, the wash-cycle duration and data can change.

The number and type of wash cycles and options may vary depending on the dishwasher model.

Notes:

Optimum performance levels when using the “Fast” cycle can be achieved by respecting the specified number of place settings.

To reduce consumption even further, only run the dishwasher when it is full.

Note for Test Laboratories: for information on comparative EN testing conditions, please send an email to the following address:

Instructions on wash-cycle selection and detergent dosage

1. The ECO wash cycle is the standard cycle to which the energy label data refers. It can be used to wash crockery with a

normal soil level and is the most efficient cycle in terms of energy and water consumption for this type of crockery. 27

gr/ml + 6 gr/ml** – 1 Tab (**Quantity of pre-washing detergent)

2. Heavily soiled dishes and pans (not to be used for delicate items). 30 gr/ml – 1 Tab

3. Normally soiled pans and dishes. 27 gr/ml + 6 gr/ml** – 1 Tab

4. Limited quantity of daily soiling (ideal for 4 place settings) 25 gr/ml – 1 Tab

5. Cycle for delicate items, which are more sensitive to high temperatures 30 gr/ml – 1 Tab

Standby consumption: Left-on mode consumption: 5,0 W - Off mode consumption: 0.5 W

Wash Cycle Drying Options

Wash Cycle

Duration

Water

Consumption (l/

cycle)

Energy

Consumption

(kWh/cycle)

Eco Yes No 03:10’ 11 1,04

Intensive Yes No 02:30’ 16,5 1,7

Normal Yes No 02:00’ 16,0 1,35

Fast No No 01:00 11,5 1,15

Delicate Yes No 01:30 12 1,1

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Hotpoint FDIS 11210 P Mode d'emploi Page 11