Hotpoint PFT 8H4X UK Mode d'emploi télécharger pdf (Page 8)

Start-up and use

Measuring out the detergent

A good wash result also depends on the correct amount of

detergent being used; exceeding the stated amount does

not result in a more effective wash and increases

environmental pollution.

Only use detergent which has been specifically designed

for dishwashers.

DO NOT USE washing up liquid.

Using excessive detergent may result in foam residue

remaining in the machine after the cycle has ended.

To achieve the best results from each washing and drying

cycle, powder detergent, rinse aid liquid and salt should be

used.

Compartment A: Washing detergent

Compartment B: Pre-wash detergent

1. Open cover C by pressing button D.

2. Pour in the detergent after consulting

the

Table of wash cycles

• For powder detergent use

compartments A and B.

• For detergent in tablet form: when the

cycle requires 1 tablet, place it in

compartment A and close the cover;

when it requires 2, place the second

tablet at the bottom of the appliance.

3. Remove detergent residues from the edges of the compartment

and close the cover until it clicks.

* Only available in selected models.

The control panel features a “Touch Control” system;

press the symbols lightly with your fingertips to activate

the command.

The symbols in the key to wash cycles (to the left of the

control panel) DO NOT light up.

Wash cycles are selected by pressing the P symbol.

The machine has a buzzer/set of tones

(depending on the

dishwasher model)

to inform the user that a command has

been implemented: power on, cycle end, etc.

The symbols/indicator lights on the control panel/display may

vary in colour

(depending on the dishwasher model)

Starting the dishwasher

1. Turn the water tap on.

2. Press the ON/OFF symbol: the display lights up for a few

seconds, and the text ON

appears.

3. Open the door and pour in a suitable amount of detergent (

see

Measuring out the detergent

4. Load the racks (

see Loading the racks

) and shut the door.

5. Press the

P symbol to select the wash cycle in accordance

with the type of crockery and its soil level

(see

Table of wash

cycles).

6. Select the wash options* (

see options

7. Press the Start/Pause symbol; the Start symbol on the display

lights up. The wash cycle number, the symbols corresponding to

washing, any selected options and the time remaining until the end

of the cycle appear on the display.

8. Once the wash cycle has ended, its corresponding number

appears on the display, along with the text END. Switch off the

appliance using the ON/OFF symbol; the text OFF will appear on

the display. Shut off the water tap and unplug the appliance from

the electricity socket.

9. Wait for a few minutes before removing the crockery, in order

to avoid burns. Unload the racks, beginning with the lower level.

- The machine will temporarily switch off automatically

during certain extended periods of inactivity, in order to

minimise electricity consumption.

AUTO WASH CYCLES*: This model of dishwasher is

equipped with a special sensor which can be used to assess the

level of soiling and automatically select the most efficient and

economic wash cycle accordingly.

The duration of the auto wash cycles may vary due to the operation

of the sensor.

If the crockery is only lightly soiled or if it has been

rinsed with water before being placed in the dishwasher,

reduce the amount of detergent used accordingly.

Modifying a wash cycle in progress

If a mistake was made during the wash cycle selection process it

is possible to change the cycle, provided that it has only just

begun. To change the wash cycle, switch off the machine by

pressing and holding the ON/OFF/Reset symbol; the text 3-2-1

OFF

will appear on the display. Switch the machine back on

using the same symbol and select the wash cycle and any desired

options again.

Adding extra crockery

Press the Start/Pause symbol; the Pause symbol will light up.

Open the door, taking care to avoid the escaping steam, and

place the crockery inside the appliance. Press the Start/Pause

symbol again: the Start symbol lights up and the cycle is resumed.

Press the Start/Pause symbol to pause the machine; the

wash cycle is stopped temporarily.

At this stage it is not possible to change the wash cycle.

Accidental interruptions

If the door is opened during the wash cycle, or if there is a power

cut, the cycle stops. It starts again from the point at which it was

interrupted once the door has been shut or the electricity supply

is restored.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire

Hotpoint PFT 8H4X UK Mode d'emploi Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Lave-vaisselle Hotpoint PFT 8H4X UK