Hotpoint BE82 Manuel d'utilisateur télécharger pdf (Page 15)

Using Your Hob

NOTE: The timer starts counting down immediately. An audio signal sounds at the end of the

cooking time and the heating zone switches off. Press the key to switch off the

power to the hob.

NOTE: The indicator light that corresponds to the heating zone being programmed flashes

slowly and then remains lit once the programming operation is confirmed. The

indicator light that corresponds to the previously programmed heating zone flashes.

A heating zone is already programmed, the corresponding

indicator light is on and the timer display is activated. It

starts flashing slowly as soon as you start to programme

another heating zone.

To display the remaining time programmed for a heating

zone, select it by pressing the relevant heating zone

selection key, its indicator light will remain on while the

other one flashes.

Press the key again to confirm the programming

operation.

Select the second heating zone, then press the key to

access the programming function. Press the key to

display the required duration.

Multiple programming:

It is possible to programme all four heating zones at the same time. Follow the

previous step by step procedure to programme the first heating zone, then proceed as

follows:

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Pas de commentaire

Hotpoint BE82 Manuel d'utilisateur Page 15