Hotpoint SE102PX Mode d'emploi télécharger pdf (Page 5)

 The first time you use your appliance, heat the empty

oven with its door closed at its maximum temperature

for at least half an hour. Ensure that the room is well

ventilated before switching the oven off and opening

the oven door. The appliance may emit a slightly

unpleasant odour caused by protective substances

used during the manufacturing process burning away.

 The Control panel lock and DEMO mode can be

activated/deactivated even when the control panel is

switched off.

Control panel lock

To lock the oven controls, press the and

buttons for 5 seconds. A buzzer sounds and the

TEMPERATURE display shows r-0.

Press again to unlock the controls. The STOP button

is always active.

Demo mode

The oven can operate in DEMO mode: all heating

elements are deactivated, and controls remain

operative.

To activate the DEMO mode, press the

, , and

buttons simultaneously.

To deactivate the DEMO mode, press the

, ,

and buttons at the same time. A buzzer sounds

and the display shows demo off.

Setting the clock and timer

After the appliance has been connected to the mains, or

after a blackout, the

button will begin to blink.

To set the time:

1. Set the hour figure within 8 seconds using the +

and - buttons on the right hand side.

2. Press the

button again.

3. Adjust the minutes using the + and - buttons on

the right hand side.

4. Wait at least 8 seconds for the setting to be

memorised, or press the

button again.

To make any necessary changes, switch on the control

panel by pressing the

button, then press the

button and follow the described procedure.

When the set time has elapsed, a buzzer will sound.

The buzzer will automatically stop after 6 seconds or when

any active symbol on the control panel is pressed.

To set the timer, press button

and repeat the steps

described to set the clock. The

button indicates that

the timer is active.

 The timer does not switch the oven on or off.

Starting the oven

1. Switch the control panel on by pressing the

button.

2. Press the button corresponding to the desired

cooking mode. The displays show the time and

temperature of the selected cooking mode.

3. Press the START button to begin cooking.

4. The oven will begin its preheating phase, and the

current preheating temperature indicator lights turn red.

The temperature may be changed by pressing the +

and - buttons on the right hand side of the control

panel.

5. When the preheating stage is complete, a buzzer

sounds and all current preheating temperature indicator

lights are illuminated: place the food in the oven.

6. During cooking it is always possible to:

- Change the temperature by pressing the + and -

buttons on the right hand side of the control panel.

- Set the cooking duration (see Cooking Modes).

- Press STOP to interrupt cooking.

7. The oven switches off automatically after two hours:

this default time is set for all cooking modes for safety

reasons.

The cooking duration may be changed (see Cooking

Modes).

8. If a blackout occurs, while the oven was already

operating, an automatic system within the appliance

will reactivate the cooking mode from where it was

interrupted as long as the temperature has not

dropped below a certain level. Programmed cooking

modes which have not started will not be restored and

must be reprogrammed.

 There is no preheating stage for the BARBECUE

mode.

 Never put objects directly on the bottom of the oven;

this will avoid the enamel coating being damaged.

 Always place cookware on the rack(s) provided.

Cooling ventilation

In order to cool down the external temperature of the

oven, a cooling fan generates a stream of air which

escapes between the oven control panel and the oven

door. At the beginning of the FAST CLEAN mode, the

cooling fan operates at low speed.

 Once the cooking has been completed, the cooling

fan continues to operate until the oven has cooled

down sufficiently.

Oven light

When the oven is not in operation, the lamp can be

switched on at any time by opening the oven door.

Start-up and use

1 2 3 4 5 6 7 8 9 10 ... 15 16

Commentaires sur ces manuels

Pas de commentaire

Hotpoint SE102PX Mode d'emploi Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Micro-ondes Hotpoint SE102PX