Hotpoint SE48101PGX Mode d'emploi Page 14

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 20
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 13
14
GB
Before initiating the FAST CLEAN mode:
Remove large or coarse food residues from inside
of the oven using a damp sponge. Do not use
detergents.
Remove all accessories.
Do not place tea towels or pot holders over the
oven handle.
If the oven is too hot, the pyrolytic cycle may not
start. Wait for the oven to cool down.
The programme may only be started once the oven
door has been closed.
To activate the FAST CLEAN mode, press the
button and select the desired power level (the mode
has three power levels which cannot be modified):
1. Economy (ECO): 1 hour
2. Normal (NOR): 1 hour and 30 minutes
3. Intensive (INT): 2 hours.
Safety devices
The door is locked automatically as soon as the
temperature exceeds a certain value.
Should a malfunction occur, the heating elements
will switch off.
Once the oven door has been locked, you cannot
change the duration and end time settings.
Programming is possible only after selecting the
FAST CLEAN mode.
Programming delayed automatic cleaning
1. Press the
button until the .icon and the two
digits on the TIME display flash.
2. Press the "+" and "-" buttons to adjust the hour
value.
4. Press the
button again until the other two
digits on the TIME display begin to flash.
5. Press the "+" and "-" XXX buttons to adjust the
minute value.
6. Press the button again to confirm.
For example: it is 9:00 a.m. and the Economy
(ECO) FAST CLEAN mode level has been
selected: default set time 1 hour. 12:30 is set as
the end time. The programme will start
automatically at 11:30 a.m.
Programming has been set when the
and
buttons are illuminated. The TIME display shows the
FAST CLEAN end time and duration alternately.
To cancel a programmed procedure press the
START/STOP button.
Once the automatic cleaning cycle is over
You will have to wait until the temperature inside the
oven has cooled down sufficiently before you can
open the oven door. You will notice some white dust
deposits on the bottom and the sides of your oven;
remove these deposits with a damp sponge once
the oven has cooled down completely. Alternatively,
you can make use of the already heated oven, in
which case it is not necessary to remove the
deposits, they are completely harmless and will not
affect your food in any way.
Vue de la page 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire