Hotpoint AKP 121/NB Mode d'emploi télécharger pdf (Page 9)

Attention: When carrying out the following operations it

is advisable to wear protective gloves. These instructions

should be carefully followed both to prevent injury and in

order not to damage the oven door and hinges.

How to remove the oven door:

1. Open the oven door fully (see fig. 1).

2. Lift the two catches and push them forwards as far as they

go (see fig. 2).

3. Remove the door by closing it partially and pulling it

upwards (see fig. 3).

Pay attention to the hinges when cleaning and/or removing the

door (fig. 4).

To remount the door:

1. Insert the hinges into their grooves and lower the door

fully.

2. Lower the two catches.

3. Close the oven door fully.

Attention: These instructions should be carefully followed both

to prevent injury and in order not to damage the oven door and

hinges.

Changing the rear oven lamp bulb:

1. Disconnect the oven from the electrical supply.

2. Let the oven cool before turning the lamp cover left to

unscrew it (see fig. 5).

3. Change the bulb (see note).

4. Screw the lamp cover back on.

5. Reconnect the oven to the electrical supply.

Note: use only 25 W/230 V, E-14 type, T300°C bulbs

available from After Sales Service.

IMPORTANT: Do not use the oven until the lamp cover

has been repositioned.

1 2 3 4 5 6 7 8 9 10

Pas de commentaire

Hotpoint AKP 121/NB Mode d'emploi Page 9