Hotpoint EG95 Manuel d'utilisateur télécharger pdf (Page 19)

Clock & Automatic Oven Timer Operation

b) TO SET THE TIMER TO SWITCH THE OVEN(S) ON AND OFF AUTOMATICALLY

Step 1 Check that the correct time of day is set, if not follow instructions

for setting the time of day.

Step 2 Place food onto the correct shelf position in the oven and close the

oven door(s).

Step 3 Turn the upper knob (A) (without pulling), clockwise, until the

symbol appears in the display window.

This allows the auto function to be set.

Step 4 Set the orange / gold short finger to the "Start" time by pulling the

upper knob (A) and turning it clockwise.

e.g. 5 o'clock (as shown).

Note: The "Start Time" is the time of day you want the Auto

Cooking programme to start.

Step 4 Set the "Cook Period" by turning (without pulling) the upper knob

(A) clockwise, until the required cook period in minutes is

indicated in the display window.

e.g. 120 minutes (as shown).

Note: The "Cook Period" is the length of time that you wish the

food to cook, and it can be set for up to 180 minutes.

Step 5 Turn the oven control(s) to the required temperature, and if

necessary select the appropriate oven function.

Note: If an “Auto Cooking Programme” has been set the oven(s)

will ONLY operate during the pre-programmed times.

At the end of the Auto Cook Period the oven(s) will switch off

and a bell will ring for approximately 4 minutes.

Step 6 Return the oven controls to the OFF position.

Step 7 To cancel the Bell and return the timer to "Manual Operation",

turn (without pulling), upper knob (A) clockwise, until the

symbol is shown in the display window.

120

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 43 44

Pas de commentaire

Hotpoint EG95 Manuel d'utilisateur Page 19