Hotpoint EGZH 5800 IN Mode d'emploi télécharger pdf (Page 3)

For ovens installed under the worktop, leave a minimum clearance of 5 mm between the upper edge

of the oven and the lower edge of the worktop (fig. 5).

For correct operation of the appliance, this

clearance must always be unobstructed.

If the kitchen unit is not securely fixed to the wall, it must be anchored with standard brackets

(A)

(fig. 6).

Electrical connection

Regulations require that the appliance be earthed.

Connection to the mains must be carried out by a qualified technician in accordance with the

manufacturer's instructions and in compliance with local regulations.

The installer is responsible for connecting appliances correctly to the mains and for observing the safety

regulations.

The oven power cable must be long enough to connect the built-in oven to the mains.

Observance of safety directives requires that a multi-pole switch with a minimum contact gap of 3 mm

be used for the installation.

Do not use multiple plug adapters or extension leads.

After the oven has been installed, the electrical components must be inaccessible.

41055006bGB.fm Page 18 Thursday, July 27, 2006 9:41 AM

1 2 3 4 5 6 7 8 ... 11 12

Pas de commentaire

Hotpoint EGZH 5800 IN Mode d'emploi Page 3