Hotpoint FTCF 87B 6HY1 EU Mode d'emploi télécharger pdf (Page 8)

Control panel The Display

ON/OFF

Button

Display Unit &

Selection Buttons

Key Lock

Button & Light

PROGRAMME

knob

Indicator

HEAT LEVEL

Button & Lights

START/PAUSE

Button & Light

OPTION

Buttons & Lights

The ON/OFF button : If the dryer is running and this button is pressed and held for more that 3 seconds the dryer is

turned off, it counts down 3, 2, 1, Off and the programme is then cancelled. Press and hold for more than 3 seconds

and the dryer reactivates.

The PROGRAMMES knob sets the programme: rotate it until the indicator is pointing to the programme you want to

select (see Start and Programmes).

The OPTION buttons select available options for your selected programme. The lights indicate that the option has been

selected.

The START/PAUSE button/light starts a selected programme. When you press this button there will be one beep

and the progress lights will flash to confirm the action. When a programme is running, pressing this button in pauses the

programme and stops the dryer. The light is green when programme is running, flashing amber if the programme has

been paused or flashing green if on standby waiting to start a programme.

The Display Unit gives an indication of the drying or delay time together with icons that light to give warning information

and show the status of your programmes progress.

The three buttons below the display select ‘Automatic’ or ‘Timed Dry’ and if required a delayed start (see Start and

Programmes or The Display).

The Key Lock button/light : Press and hold this button after selecting your programme and any options, the light

turns on. This prevents the programme settings from being changed. When the light is lit, the other buttons are disabled.

Hold the button to cancel and the light will go out.

The Empty Water icon : signals that the water container should be emptied. The display will take a few seconds to

update after replacing the empty water container, the dryer must be running for this to happen (see The Controls).

Note: If the water container fills the ‘water container full ‘icon flashes, the display shows “H20”, the heat is turned off

and your clothes will not dry.

The Clean Filter icon

: gives a reminder before every programme, that it is essential to clean the filter every time the

dryer is used (see Maintenance and Care).

The Clean Condenser icon : gives a reminder that it is essential to clean the condenser at regular intervals (see

Maintenance and Care).

Timed Dry

After selecting a programme that has a Timed Dry option, press the Timed Dry button and the Timed Dry icon

will light, the display will reduce the selected time each time you press and release this button (see Start and

Programmes). Each programme that has a timed option has different times available and the selection of up to 11

drying times will also depend on the heat setting that you have selected.

Each press of the button decreases the drying time. If you change your mind, press the Sensor Dry button and the

sensing level options are available.

If the Timed Dry option is not available the display will flash and the buzzer will beep three times. The selected time

remains displayed after the programme starts and can be changed during the programme if you wish.

Delay Timer

After selecting a programme that has a Delay Timer option, a delay start time can be selected. Each press of the

Delay Timer button

advances the delay setting in 30 minutes increments from 0:30 to 9:30 and then increments

from 10h to 24h then OFF and then after five seconds cancels the delay.

For delays of 10 hours or more the display counts down the time in hours until 10 hours, then the display shows

“9:59” and then continues to count down in minutes.

For delays 9 hours or less the display shows hours and minutes and then counts down in minutes for all of the delay.

After the START/PAUSE button

is pressed the delay time can be changed or cancelled. When the delay period

finishes the delay icon

is off and the Time to End is displayed.

Note: During this period the clothes will tumble occasionally to help prevent creases developing.

The Display has three main functions, each with its corresponding button.

Dryness Sensing Levels

After selecting a programme that has a Sensor Dry option, press and release the button until the required dryness

sensing level is displayed. If the sensing option is not available with your selected programme, the display will flash

and the buzzer will beep three times.

! Some sensing programmes do not have all seven dryness level options available.

Dryness levels:

Damp Dry: Dries your items ready to be ironed using a machine or rotary ironer.

Iron Dry: Dries your items ready to be ironed with a hand iron.

Hanger Dry Plus: Dries your delicate items ready to be hanged for final drying.

Hanger Dry: Dries your items ready to be hanged for final drying.

Light Dry: Dries your delicate items ready to be put away.

Cupboard Dry: Dries your items ready to be put away.

Extra Dry: Dries your items ready to be worn.

Time to End

If the delay icon is off the time displayed is the Time to End for the programme running. When timed programmes

are selected the time displayed throughout the cycle is the actual time remaining. When Automatic programmes are

selected the time displayed is an estimate of the time remaining: When the programme is selected the display shows

the time required to dry a full load.

The time remaining is constantly monitored during the drying cycle and is updated to show the best forecast. The

Time to End is displayed in hours and minutes and counts down each minute. The colons between the hours and

minutes in the display flash to show the time is counting down.

The display also shows if there is a problem with your dryer, if this occurs the display will show “F” followed by a fault

code number, the three option lights and the START/PAUSE light will also flash amber (see Troubleshooting).

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire

Hotpoint FTCF 87B 6HY1 EU Mode d'emploi Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Séchoirs à tambour Hotpoint FTCF 87B 6HY1 EU