Hotpoint WMTL80 Manuel d'utilisateur télécharger pdf (Page 5)

Follow these 5 steps for a trouble free installation:

1. Choose a Location...

2. Remove Transit Bolts...

3. Levelling...

4. Moving the Appliance...

5. Connect to the Water Supply...

6. Connect to a Drainage System...

Installation Instructions

IMPORTANT INFORMATION:

●

Do not plug in and switch appliance on at the mains until installation is complete.

●

You may be charged for a service call if a problem with your appliance is caused

by incorrect installation or misuse.

The choice of location for your appliance will influence its performance.

●

Position where possible on a solid floor. Vibration may occur with a wooden floor.

●

Take care with vinyl floor coverings.The weight of the appliance may cause indentations in

some vinyl floor coverings.

●

You should not install your appliance on a carpeted floor, but if this is unavoidable, ensure

that air can circulate around its base.

●

If locating next to another appliance or an item of furniture, leave space between them to

allow air to circulate.

●

For your safety and to comply with IEE regulations, you should not install your appliance in a

bath or shower room.Seek professional advice if you wish to do so.

●

Ensure sufficient space is allowed for the appliance - minimum requirement for dimensions

(H) 850mm x (W) 400mm x (D) 600mm

●

Ensure the electrical socket and water taps are easily accessible and that the water

supply can be isolated if necessary.

1. Choose a Location...

1 2 3 4 5 6 7 8 9 10 ... 19 20

Pas de commentaire

Hotpoint WMTL80 Manuel d'utilisateur Page 5