Hotpoint WMTL80 Manuel d'utilisateur télécharger pdf (Page 6)

●

Please retain all

packaging components

as they must be replaced

if the machine is to be

transported in the

future.

●

Your machine was

inspected before

leaving the factory.

You may therefore find

traces of water in the

tub or in the detergent

compartment.

Remember you may be

charged for a service

call if a problem with

your appliance is

caused by incorrect

installation or misuse.

2. Remove Transit Bolts...

BEFORE ATTEMPTING TO USE THE MACHINE,YOU MUST FOLLOW THE PROCEDURE DESCRIBED BELOW.

These operations involve removing four transit fixing bolts that immobilise the tub of your machine

during transportation.

These “unpacking”operations are compulsory for safety reasons.

Remove ALL four transit fixing bolts

(A) using a 10mm spanner. Unscrew

until three threads can be seen.

When all four transit fixing bolts have

been removed, blank off the holes

left using the plastic covers provided

(B).

Hold the end of the bolt and pull,

firmly but carefully.

Ensure each transit fixing bolt is

removed complete with spacer.

Example transit fixing bolt

complete with spacer.

3. Levelling...

To guarantee correct functioning the appliance must be standing firm and level.

The four feet can be turned to level the appliance. Ensuring your machine is

level will help prevent vibration and risk of damage to the appliance.

4. Moving the Appliance...using the wheels.

If your appliance is fitted with folding castor's, it is easy to

move. To extend the wheels, move the lever at the bottom

of the machine from left to right.

Do not forget to return the lever to its original position.

The machine should not be used while standing on its

two ‘front’ castor's.

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Commentaires sur ces manuels

Pas de commentaire

Hotpoint WMTL80 Manuel d'utilisateur Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Rondelles Hotpoint WMTL80