EN
7
Use & Care guide
FUNCTIONS
CONTROL PANEL LOCK
To prevent the hob from being switched on accidentally, press and hold
down the OK/Control Lock-3sec control for 3 sec. An acoustic signal and
a light above the symbol will switch on to indicate that the lock is in place.
The control panel is locked except for the switch o function.
To switch o the control lock, repeat the activation process. The light
will switch o and the hob controls are again active.
PAUSE
The Pause function interrupts hob operation for about 30 sec. During this
time, it is possible to clean the surface around the controls without altering
any presets. After this time, the hob will go back to operating as normal.
TIMER
The timer can be used to set a maximum cooking time of 99 minutes.
The timer setting can be used on each cooking zone, following the same
procedure. The timer always shows the time set for the selected area, or
the shortest remaining time.
To start the timer:
1. Switch on the required cooking zone by pressing any part of the
slider.
2. Press the or control to set the required time. The display
will read “00”.
When the set time is up, an acoustic signal will sound and the cooking
zone will switch o automatically.
To change the timer setting:
1. Press the slider control for the cooking zone.
2. Press the or
control to change the required time.
To switch o the timer:
Press the and controls together until the timer switches o.
FLEXIBLE AREA
Select the “Flexible Area” control to control two cooking zones at the
same time. It is possible to use both slider controls at the same time to
control the power.
Using this function is ideal to increase the cooking zone with the
advantage of positioning cookware as needed within the selected area.
Ideal for using oval or rectangular pans or grill pans.
VERTICAL FLEXIBLE ZONE
This can be used to control the two cooking zones on the left and right,
at the same time.
To switch on the Flexible area function:
1. Switch on the hob.
2. Press the control for the type of Flexible area being used (vertical
left, vertical right). Both areas will be connected and the displays
will read “0”.
3. Using the slider, select the power level you require.
To switch o the Flexible area function:
Press the control for the Flexibile area that is functioning: the cooking
zones will go back to operating individually.
The Flexible area function will also switch o when the hob switches o
at the end of cooking.
For the best results, always cover at least one or more points marked on
the glass surface or inside the Flexible area.
FLEXI FULL ZONE
When you select the Flexi Full area, you can control the whole surface of
the hob at a single power level.
Any of the sliders can be used to control the power. Using this function
is ideal to extend the cooking zone with the advantage of being able to
place pans where you like inside the whole area. It is also excellent for
large, oval, or rectangular pans or grill pans.
Covering the whole activated area will achieve the maximum available
power.
(12 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels