Hotpoint X156G Manuel d'utilisateur télécharger pdf (Page 19)

Installation Instructions

The cooker can be close fitted below hotplate level. This requires a

minimum distance of 503mm between cupboard units of

hotplate height.

When installing next to a tall cupboard, partition or wall, for a minimum

distance of 400mm above hotplate level, allow a side clearance of

at least 65mm.

The diagram below illustrates the minimum clearance between the

cooker and adjacent walls, cupboards etc.

The wall behind the cooker 150mm below the hotplate and 450mm

above, and the width of the cooker, must be a non-combustible

material such as ceramic wall tiles.

If the cooker is to be fitted close to a corner on the left hand side,

ensure that there is a clearance of at least 50mm to allow the main

oven door to open fully for when removing oven shelves.

If a cooker hood is to be installed, refer to the cooker hood

manufacturers’ instructions regarding fixing height.

Cooker Hoods

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Pas de commentaire

Hotpoint X156G Manuel d'utilisateur Page 19