Hotpoint EC6005 Manuel d'utilisateur télécharger pdf (Page 5)

The following instructions are provided for qualified install-

ers so that they may accomplish installation, adjustment

and technical maintenance operations correctly and in

compliance with current regulations and standards.

Important: before any operation, disconnect the hob from

the electrical supply.

Installation

• The hob should be installed on a piece of kitchen

furniture simply by removing the corresponding space.

• The material used for the working surface must be

able to resist a temperature of approximately 100°C

• The hob must be positioned at a minimum distance

of 40mm from the back wall or from any other vertical

surface, to allow for adequate aeration and to prevent

the surfaces surrounding the appliance from overheat-

ing.

• If you want to install the hob on top of an oven, the

latter must come with a forced ventilation cooling sys-

tem.

• Try to avoid installing the hob on a dishwasher; if

you have to do this, place a waterproof separating ele-

ment between the two appliances.

Fastening

Very important: The installation of a glass ceramic hob

must be carried out on a perfectly-level supporting sur-

face.

Any deformations caused by incorrect fastening could

alter the characteristics and performance of the hob.

The fastening springs are screwed on with screws (see

diagram).

It is essential that these screws are always accessi-

ble.

Insert the hob in the space provided in furniture unit, ex-

ercising suitable pressure on the entire perimeter so that

the hob sticks perfectly to the top.

FRONT OF HOB

KITCHEN

WORKTOP

REAR SPRING ASSEMBLY

HOB FROM BELOW

The length of the adjusting screw of the fastening hooks

must be set before they are assembled, in according to

the thickness of the top and to the following table:

Installation and fastening

Distance to

keep between the

cut-out slot and

the cabinet

560 +/- 1

490 +/- 1

590

520

560 +/- 1

490 +/- 1

574

504

h Top = 30mm h Top = 40mm

17,5 mm 7,5 mm

1 2 3 4 5 6 7 8 9 10 ... 15 16

Commentaires sur ces manuels

Pas de commentaire

Hotpoint EC6005 Manuel d'utilisateur Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Plaques chauffantes Hotpoint EC6005