Hotpoint SC98 Manuel d'utilisateur télécharger pdf (Page 7)

The Controls

The 7 Chefs oven combines the advantages of a

convection oven with those of fan assisted models in a

single appliance.

It is extremely versatile allowing you to choose easily and

safely between different cooking modes. The various

features offered by the oven are selected by means of the

function selector "B" situated on the control panel.

Setting Time and Date

Selecting the language

Press button 3 for a few seconds with the oven turned off.

The languages available appear in sequence on the display

panel. Press button 3 again to select the desired language.

Setting the clock

The clock can only be set if the oven is turned off.

After the appliance has been connected to the power

supply, or following a power failure, the clock displays a

flashing 12:00 or the last time memorised.

The time can be changed by pressing button 1 and resetting

the clock using knob "C", which you can modify only whilst

the scrolling writing crosses the display.

Setting the date

To update the date, press and hold down button 1 until the

word "YEAR" comes up on the display. Update the year by

turning knob "C" and then press button 1 to set the month,

again using knob "C". Press button 1 again to set the day

using knob "C". Press button 1 to memorise the date set.

Minute Minder Feature

The timer can only operate when the oven is turned off.

Please remember that the timer does not control the

starting or stopping of the oven, it merely sounds a buzzer

when the time is up and can be interrupted at any time just

by pressing a button.

To set the Minute Minder, press button 2, and then make

the necessary adjustment using knob "C".

Press button 4 to start the timer.

At all times during the Minute Minder operation, you may:

• adjust its duration using knob "C";

• stop the countdown by pressing button 4 for

approximately 3 seconds or turning knob "B" anti-

clockwise;

• enable/disable the control panel lock, by pressing button

2 for at least 3 seconds (see the paragraph entitled

"Locking and Unlocking the Control Panel").

Locking and Unlocking the Control Panel

This option enables the user to lock all the buttons and

knobs. We especially advise you to use this option if there

are children present. To enable the control panel lock, press

button 2 for a few seconds. The word "LOCKED" comes

up on the display. To restore the usual commands to the

appliance, just press button 2 again for a few seconds.

The word "UNLOCKED" will come up on the display.

Selecting the display panel brightness

To update the date, press and hold down button 4 until the

word "BRIGHTNESS" comes up on the display.

Turn knob "C" clockwise/anticlockwise to increase/

decrease the brightness of the display panel. A few seconds

after this selection, the oven will be ready for further

instructions.

The oven light

At any time, including during pre-heating and cooking, you

can turn the oven light on or off by pressing button 4. When

the oven is turned off, the light turns off automatically 10

minutes after the last instructions were entered onto the

control panel.

Cooling ventilation

In order to reduce the external temperature of the oven,

this appliance has been equipped with a cooling fan. During

cooking, the fan is always on and a normal flow of air can

be heard exiting between the oven door and the control

panel.

In order to raise the temperature inside the oven more

quickly during pre-heating, the speed of the air outlet is

approximately half the speed of air outlet during cooking.

If there is a hob above the oven, the cooling fan may switch

itself on automatically to protect the electronic components,

even if the appliance has been switched off.

Note: When cooking is done, the fan stays on until the

oven cools down sufficiently.

How To Choose a Cooking Mode/Function or a Pre-

Set Recipe:

Turn the function selector "B" clockwise to choose from

the default cooking modes or from the pre-entered recipes

available (see the recipe book).

For each cooking mode, the display will indicate the

following:

• the cooking mode name (or that of the recipe);

• the cooking mode number (or that of the recipe);

• the default temperature;

• the heat sources;

Should the recommended temperature not be to your liking,

you can always adjust it using control "C".

Each cooking mode is also associated with a

recommended cooking time, which you can modify, from

one minute to 10 hours, by pressing button 2 and then

turning control "C" to set it to the desired value. The cooking

time can be adjusted until the scrolling wording disappears

completely from the display panel. The selected cooking

time does not include the time required for preheating the

oven.

To start cooking, press cooking start button 4.

With the exception of the "Fast cooking" and "Grill" modes,

the oven will now begin the pre-heating stage, during which

you may still:

• change the temperature by turning control "C";

• change the cooking time by pressing button 2 and then

turning control "C";

• enable/disable the control panel lock, by pressing but-

ton 2 for at least 3 seconds (see the paragraph entitled

"Locking and Unlocking the Control Panel");

• stop cooking and turn the oven off by turning the function

selector "B" anti-clockwise.

Note: pre-heating is performed automatically by the appli-

ance, which sets the pre-heating time according to the tem-

perature selected by the user. The display panel will feature

how long the oven will take to preheat before cooking starts.

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Hotpoint SC98 Manuel d'utilisateur Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Four Hotpoint SC98