Hotpoint RB526DHWW Manuel d'utilisation et d'entretien télécharger pdf (Page 28)

Before you call for service…

Troubleshooting Tips

Save time and money! Review the charts on the following

pages first and you may not need to call for service.

Problem Possible Causes What To Do

Surface units will not Improper cookware • Use pans which are flat and match the diameter

maintain a rolling boil being used. of the surface unit selected.

or cooking is not

fast enough

Radiant surface units A fuse in your home may be • Replace the fuse or reset the circuit breaker.

do not work properly blown or the circuit breaker

tripped.

Cooktop controls • Check to see the correct control is set for the surface

improperly set. unit you are using.

Surface unit stops • This is normal. The unit is still on and hot.

glowing when turned

to a lower setting

Scratches (may appear Incorrect cleaning • Scratches are not removable. Tiny scratches will become

as cracks) on radiant methods being used. less visible in time as a result of cleaning.

cooktop glass surface

Cookware with rough bottoms • To avoid scratches, use the recommended cleaning

being used or coarse particles procedures. Make sure bottoms of cookware are clean

(salt or sand) were between before use, and use cookware with smooth bottoms.

the cookware and the surface

of the cooktop.

Cookware has been slid

across the cooktop surface.

Areas of discoloration Food spillovers not cleaned • See the Cleaning the glass cooktop section.

on the radiant glass before next use.

cooktop

Hot surface on a model • This is normal. The surface may appear discolored

with a light-colored glass when it is hot. This is temporary and will disappear

cooktop. as the glass cools.

Plastic melted to Hot cooktop came into  6HHWKH*ODVVVXUIDFH³SRWHQWLDOIRUSHUPDQHQWGDPDJH

the radiant surface contact with plastic placed section in the Cleaning the glass cooktop section.

on the hot cooktop.

Pitting (or indentation) Hot sugar mixture spilled • Call a qualified technician for replacement.

of the radiant glass on the cooktop.

cooktop

Frequent cycling off Improper cookware • Use only flat cookware to minimize cycling.

and on of radiant being used.

surface units

Control signals after You forgot to enter a • Touch the Bake pad and desired temperature or the

entering cooking time bake temperature or Self Clean pad and desired clean time.

or delay start cleaning time.

Coil surface units do The surface units are • With the controls off, check to make sure the surface

not work properly not plugged in solidly. unit is plugged completely into the receptacle.

The surface unit controls • Check to see the correct control is set for the surface

improperly set. unit you are using.

The drip pans are not set • With the controls off, check to make sure the drip

securely in the cooktop. pan is in the recess in the cooktop and that the

opening in the pan lines up with the receptacle.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Commentaires sur ces manuels

Pas de commentaire

Hotpoint RB526DHWW Manuel d'utilisation et d'entretien Page 28

Commentaires sur ces manuels

Produits connexes et manuels pour Petits appareils de cuisine Hotpoint RB526DHWW