Hotpoint SX1046S L P 0 X Mode d'emploi télécharger pdf (Page 7)

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

Start-up and use

WARNING! The oven is provided

with a stop system to extract the

racks and prevent them from

coming out of the oven (1).

As shown in the drawing, to extract

them completely, simply lift the

racks, holding them on the front

part, and pull (2).

!Thersttimeyouuseyourappliance,heattheemptyovenwithitsdoor

closed at its maximum temperature for at least half an hour. Make sure that

the room is well ventilated before switching the oven off and opening the

oven door. The appliance may emit a slightly unpleasant odour caused by

protective substances used during the manufacturing process burning away.

!Turnthecontroldialtoadjusttheparametershownonthedisplaybetween

the “<” and “>” symbols.

! To make the setting process easier, keep the control dial in position: this will

increase the scrolling speed of the numbers on the display.

! Each setting will automatically be stored in the appliance memory after 10

seconds.

! The touch controls cannot be activated if the user is wearing gloves.

! In order to optimise the cooking performance, when starting the selected

function, product settings will be applied that could cause a delayed start of

the fan and heating elements.

Models are equipped with a system of hinges which allows the door to close

slowly, without the user having to follow the movement through with his/her

hand. To use the system correctly, before closing the door:

• openthedoorfully.

• donotforcetheclosingmovementmanually.

Switching the oven on for the rst time

Afterconnectingtheoventotheelectricitysupply,thersttimeitisswitched

on the user should also switch on the control panel by pressing the

icon. The list of languages will appear in the menu. To choose the desired

language,selectitusingthecontroldial.Conrmbypressingthe

icon.

Once the selection has been made, the display will show the settings menu.

Press the

icon or scroll through using the control dial until you reach the

EXIT command and press the

icon to begin using the oven.

! After choosing the language in the menu, if the display is not used for another

30 seconds it will automatically revert to programming mode.

Setings menu commands

To enter the settings menu, switch on the control panel and press the icon.

Use the control dial to highlight the individual menu commands.

To modify the setting, press the

icon.

The following parameters are listed in the menu:

LANGUAGE: select the language shown on the display.

CLOCK: set the exact time.

TONE: activate/deactivate keypad tone.

LIGHT: activate/deactivate the internal oven light during cooking.

LOGO: activate/deactivate logo on start-up.

GUIDE: activate/deactivate operating tips.

EXIT: exit the menu.

! It is possible to exit the settings menu by pressing the

icon.

Door/Control panel lock

! The door and control panel can be locked while the oven is off, once cooking

hasstartedornishedandduringprogramming.

The door/control panel lock can be used to lock the oven door and/or controls.

To activate it, press the

icon and select the desired command by

pressing the control dial:

• NOLOCK:deactivateanactivelock;

• ONLYBUTTONS:onlylockthecontrols;

• ONLYDOOR:onlylockthedoor;

• BUTTONSANDDOOR:lockthecontrolsandthedoor.

Conrmbypressingthe

icon.

Aconrmationbuzzerwillsoundandthe

icon will appear on the display.

The lock may be activated while the oven is in use, or while it is switched off.

It can also be deactivated in all the above situations and after the oven has

nishedcooking.

! When cleaning the appliance, the door lock may be closed accidentally

(there is an exposed spring). If this happens, reopen it by turning the door

lockupwards(seegure).

KO OK

Setting the clock

To set the clock, switch on the oven by pressing the icon, then press the

icon and follow the steps described.

1. Scroll through the menu commands using the control dial, select CLOCK

and press the

icon.

2.Adjustthetimeusingthecontroldial.

3. Once you have reached the correct hour value, press the

icon.

4. Repeat steps 2 and 3 to set the minutes.

5.Toexitadjustmentmode,pressthe

icon or use the control dial to scroll

through the menu until you reach EXIT, then press the

icon.

! The clock can also be set while the oven is off, by pressing the

icon

and carrying out steps 2 to 4 as described above.

After the appliance has been connected to the mains, or after a blackout, the

clock will need to be reset.

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Commentaires sur ces manuels

Pas de commentaire

Hotpoint SX1046S L P 0 X Mode d'emploi Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Non Hotpoint SX1046S L P 0 X