Hotpoint SX1046S L P 0 X Mode d'emploi télécharger pdf (Page 16)

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

1. Open the oven door fully (see diagram).

2. Use a screwdriver to lift up and turn the small levers F located on the two

hinges (see diagram).

3. Grip the door on the two outer sides and

close it approximately half way. Pull the

door towards you, lifting it out of its slot (see

diagram). To replace the door, reverse this

sequence.

To remove oven door with soft closing hinges

1. Open the door completely.

2. Lift the pull-out hooks located on the two

hinges. If you cannot lift them manually, use

a tool as a lever.

3. Completely rotate downwards the pull-out

hooks.

4. Holding the door by its two outer sides,

slowly close it but not completely. Pull the

doortoremoveitfromitsseat(seegure).To

re-assemble the door follow the procedure in

reverse order.

5. Rotate the pull-out hooks upwards until they

touch the front of the oven.

6.Pushthepull-outhooksdownwards,making

sure they are steady and do not rotate

forward.

Inspecting the seals

Check the door seals around the oven regularly. If the seals are damaged,

please contact your nearest Service Centre (see Assistance). We recommend

that the oven is not used until the seals have been replaced.

Replacing the light bulb

To replace the oven light bulb:

1. Remove the glass cover of the

lamp-holder.

2. Remove the light bulb and replace

it with a similar one: halogen lamp

voltage 230 V, wattage 25 W, cap G 9.

3. Replace the glass cover (see

diagram).

! Do not touch the light bulb directly with your hands.

! Do not use the oven lamp as/for ambient lighting.

Automatic cleaning by PYROLYSIS

The cleaning cycle can cause the internal temperature of the oven to reach

500°C. The pyrolytic cycle is activated, burning away food and grime residues.

Dirt is literally incinerated.

Keep children away from the appliance during the automatic cleaning cycle

as surfaces may become very hot. Particles may ignite inside the oven as a

result of the combustion process. There is no cause for concern: this process

is both normal and hazard-free.

Glass cover

Lamp

Holder

compartment

1 2 ... 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire

Hotpoint SX1046S L P 0 X Mode d'emploi Page 16

Commentaires sur ces manuels

Produits connexes et manuels pour Non Hotpoint SX1046S L P 0 X