Hotpoint HS MC 07A ZO UK Mode d'emploi télécharger pdf (Page 7)

ELECTRICAL CONNECTIONS

Fuse replacement

If the mains lead of this appliance is tted with a BS 1363A 13amp fused plug, to

change a fuse in this type of plug use an A .S .T .A . approved fuse to BS 1362 type

and proceed as follows:

1. Remove the fuse cover (A) and fuse (B)

2. Fit replacement 13A fuse into fuse cover

3. Ret both into plug

Important:

The fuse cover must be retted when changing a fuse

and if the fuse cover is lost, the plug must not be used

until a correct replacement is tted. Correct replace-

ments are identied by the colour insert or the colour

embossed in words on the base of the plug. Replace-

ment fuse covers are available from your local electri-

cal store.

Socket outlet / plug

If the tted plug is not suitable for your socket outlet, contact After-Sales Service for

further instruction. Do not attempt to change the plug yourself. This procedure needs

to be carried out by a qualied technician in compliance with the manufacturer’s in-

structions and current standard safety regulations.

CLEANING AND MAINTENANCE

• WARNING: Ensure that the appliance is switched off and discon-

nected from the power supply before performing any cleaning or main-

tenance operation - risk of electrical shock. Never use steam cleaning

equipment.

• Do not spray cleaners directly on the appliance – risk of electrical

shock.

• After washing the dust container and lters allow them to dry out.

Do not use the appliance with wet dust container or lters – Risk of

electrical shock or re.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Pas de commentaire

Hotpoint HS MC 07A ZO UK Mode d'emploi Page 7