Hotpoint A6IMPA1 (X) AUS Mode d'emploi télécharger pdf (Page 12)

4. Set the cooking duration using the - and + buttons.

5. Confirm by pressing the

button or automatic

selection occurs after 10 seconds.

The timer begins counting down immediately.

A buzzer sounds for approximately 1 minute and the

cooking zone switches off when the set programme has

finished.

Repeat the above procedure for each hotplate you wish

to programme.

Using multiple programmes and the display

If one or more hotplates are programmed, the display

will show the data for the hotplate with the least time

remaining, and the light corresponding to the position

of the hotplate will flash. The lights corresponding to the

other hotplates programmed will be switched on.

To visualise the time remaining for the other programmed

hotplates, press the

button repeatedly: the time

remaining for each hotplate will be shown sequentially

in a clockwise order, starting from the front left hotplate.

Changing the programme

1. Press the

button repeatedly until the duration you

wish to change is shown.

2. Use the

buttons to set the new duration.

3. Confirm by pressing the

button.

To cancel a programme, follow the above instructions.

At step 2, press the

- button: the duration decreases

progressively until it reaches 0 and switches off. The

programme resets and the display exits programming

mode.

Timer

The hob must be switched on.

The timer can be used to set a duration up to 99 minutes.

1. Press the

programming button until the timer

indicator light is illuminated

2. Set the desired duration using the

- and + buttons.

3. Confirm by pressing the

button.

The timer begins counting down immediately. When the

time has elapsed, a buzzer will sound (for one minute).

Control panel lock

When the hob is switched on, it is possible to lock the oven

controls in order to avoid accidental changes being made

to the settings (by children, during cleaning, etc.). Press

the

button to lock the control panel: the indicator

light above the button will switch on.

To use any of the controls (e.g. to stop cooking), you must

switch off this function. Press the

button for a few

moments, the indicator light will switch off and the lock

function will be removed.

Switching off the hob

Press the button to switch off the appliance - do not

rely solely on the pan sensor.

If the control panel lock has been activated, the controls

will continue to be locked even after the hob is switched

on again. In order to switch the hob on again, you must

first remove the lock function.

“Demo” mode

It is possible to set the hob to a demonstration mode

where all the controls work normally but the heating

elements do not switch on. To activate the “demo” mode

the hob must be switched on, with all the hotplates

switched off.

• Press and hold the

+ and - buttons simultaneously

for 6 seconds. When the 6 seconds have elapsed, the

ON/OFF and CONTROLS LOCKED indicator lights will

flash for one second. Release the

+ and - buttons

and press the

button;

• The display will show the text DE and MO and the hob

will be switched off.

• When the hob is switched on again it will be set to the

“demo” mode.

To exit this mode, follow the procedure described above.

The display will show the text DE and OF and the hob

will be switched off. When it is next switched on, the hob

will function normally.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire

Hotpoint A6IMPA1 (X) AUS Mode d'emploi Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Fours Hotpoint A6IMPA1 (X) AUS