Hotpoint SX1046S L P 0 X Mode d'emploi télécharger pdf (Page 17)

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

Before initiating the PYROLYTIC cycle:

• cleantheovendoor;

• removelargeorcoarsefoodresiduesfromtheinsideoftheovenusinga

dampsponge.Donotusedetergents;

• removeallaccessoriesandtheslidingrackkit(wherepresent);

• donotplaceteatowelsorpotholdersovertheovenhandle.

! If the oven is too hot, the pyrolytic cycle may not start. Wait for the oven to

cool down.

! The programme may only be started once the oven door has been closed.

To activate the cleaning cycle

1. Press the

icon to switch on the control panel.

2. Press the

icon.

3. Scroll through the menu commands using the control dial, select

PYROLYTIC and press the

icon.

4. The appliance suggests a “NORMAL” pyrolytic cycle, with a duration of 1

hour 30 minutes. Other levels of cleaning may be selected.

• Usethecontroldialtoselectoneofthefollowing:

- “ECONOMY”: duration 1 hour

- “NORMAL”: duration 1 hour and 30 minutes

- “INTENSIVE”: duration 2 hours.

 • Press

again.

5. Press the

icon to begin the PYROLYTIC cycle.

Safety devices

• Thedoorlocksautomaticallyassoonasthetemperaturereachesahigh

value;the

icon lights up on the display.

• Pressingthe

icon cancels the cleaning cycle at any time.

• Ifamalfunctionoccurs,theheatingelementswillbeswitchedoff.

• Oncetheovendoorhasbeenlocked,youcannotchangetheduration

and end time settings.

Programming delayed automatic cleaning

! Programming is possible only after selecting the cleaning cycle.

1. Press the

icontwice;theendofpyrolysistimewillbegintoash.

2.Turnthecontroldialtoadjusttheendofpyrolysistime;holdthedialinthis

position to scroll through the numbers more quickly and make the setting

process easier. The display will show a graphic indicating the delayed start

in bar format.

3. Once you have reached the desired end time, press the

icon again.

The delayed start bar will show the current time, the time remaining until the

start of pyrolysis, the duration and the end of pyrolysis time as a graphic.

4. Press the

icon to begin the pyrolysis schedule.

5. The display shows the remaining time, moving the delayed start bar

backwards.

6.Oncepyrolysishasbegun,thedisplaywillindicatetheremainingtimeby

llingthedurationbar.

6.Whenthetimehaselapsed,“CLEANINGCYCLEFINISHED”appearson

the display and a buzzer sounds.

• Forexample:itis9:00a.m.andtheEconomyPYROLYTICcyclehasbeen

selected: default set time 1 hour. 12:30 is scheduled as the end time. The

programme will start automatically at 11:30 a.m.

To cancel a schedule, press the

icon.

Once the automatic cleaning cycle is over

Before you can open the oven door, you will have to wait for the

icon to

switch off: this indicates the oven temperature has dropped to an acceptable

level. You will notice some white dust deposits on the bottom and the sides

ofyour oven; remove thesedeposits with a dampsponge once theoven

has cooled down completely. Alternatively, you can make use of the already

heated oven, in which case it is not necessary to remove the deposits, they

are completely harmless and will not affect your food in any way.

1 2 ... 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire

Hotpoint SX1046S L P 0 X Mode d'emploi Page 17

Commentaires sur ces manuels

Produits connexes et manuels pour Non Hotpoint SX1046S L P 0 X