Hotpoint ACM 353 WH Mode d'emploi télécharger pdf (Page 20)

N C

M Y

INSTALLATION

Gas connection with pipe fitting

The fitting assembly (Fig. 6) consists of a fitting “B” for G 30/G 31,

a fitting “C” for G 20 and a gasket “D”.

Natural gas G 20

The connection is by a flexible pipe, a gas fitting “C” and a gasket

“D” (Fig. 6).

Thepipemusthaveaninternaldiameterof15mm,andbe

sufficiently tightened to be kept in place by the pipe clamp (not

supplied). This pipe must be replaced before its expiry date.

Liquid Gas G 30/G 31

Connection is by fitting “B” and gasket “D” withaflexiblepipe

with 6 mm internal diameter, and suitable for gas supply from a gas

cylinder or tank (Fig. 6).

IMPORTANT!

Always replace the pipe before its expiry date.

Use two spanners to remove the fitting (Fig. 7).

When tightening, use a normal torque value not exceeding 2.5

N/m (Kgf/m) as a precautionary measure.

Keep the rubber pipe as short as possible, with no loops or

twists.

After connection, check the coupling tightness with a soapy

solution, but never with a naked flame.

Fig. 6

Fig. 7

Cat.II

2H3+

G 30/G 31 G 20

28-30/37 mbar 20 mbar

By-pass Ø nozzle Ring opening By-pass Ø nozzle Ring opening

(1/100) mm (1/100 mm) (mm) (1/100) mm (1/100 mm) (mm)

Burners

Thermal

Reduced

load

thermal

(KW)

load

(KW)

Auxiliary (A) 1.00 0.30 27 50 3* adjustable 72 1*

Medium-speed (SR) 1.90 0.38 29 67 5,7* adjustable 100 2*

High speed (R) 3.15 0.60 39 86 all open* adjustable 130 5*

* = reference value

All operations for changing the cooker from natural gas to butane or propane or vice versa must

only be carried out by a qualified service engineer.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25

Commentaires sur ces manuels

Pas de commentaire

Hotpoint ACM 353 WH Mode d'emploi Page 20

Commentaires sur ces manuels

Produits connexes et manuels pour Fours Hotpoint ACM 353 WH