Hotpoint OL 1038 LI RFH Mode d'emploi télécharger pdf (Page 5)

! The first time you use your appliance, heat the

empty oven with its door closed at its maximum

temperature for at least half an hour. Make sure that

the room is well ventilated before switching the oven

off and opening the oven door. The appliance may

emit a slightly unpleasant odour caused by

protective substances used during the manufacturing

process burning away.

! To make the setting process easier, press and

hold the + and – buttons to scroll through the

numbers on the display rapidly.

! Each setting will automatically be stored in the

appliance memory after 10 seconds.

! The touch controls cannot be activated if the user

is wearing gloves.

Control panel lock

! The control panel can be locked while the oven is

off, once cooking has started or finished and during

programming.

To lock the oven controls, press and hold the

button for at least 2 seconds. A buzzer will sound

and the TEMPERATURE display shows the key

symbol “O—n”. The icon will light up to indicate

lock activation.

To deactivate the lock, press and hold the

button again for at least 2 seconds.

Setting the clock

! The clock can only be set when the oven is

switched off. If the oven is in standby mode,

pressing the button once will display the current

time setting. Press it again to set the time.

After connection to the power supply network or after

a blackout, the

button and the digits on the

TIME display will flash for 10 seconds.

To set the clock:

1. Press the

button.

2. Adjust the hour figure using the

+ and - buttons.

3. Once you have reached the correct hour value,

press the

button.

4. Repeat the above process to set the minutes.

If a blackout occurs, it will be necessary to reset the

clock. If the

icon flashes on the display, this

indicates that the clock has not been set correctly.

Setting the minute minder

! The minute minder may be set regardless of

whether the oven is switched on or off. It does not

switch the oven on or off.

When the set time has elapsed, the timer emits a

buzzer that will automatically stop after 30 seconds

or when any active button on the control panel is

pressed.

To adjust the timer proceed as follows:

1. Press button

2. Set the desired time using buttons

+ and -.

3. Once you have reached the desired value, press

the

button again.

The lit

symbol will remind you that the minute

minder is on.

To cancel the minute minder, press the

button

and use the + and – buttons to set the time to 00:00.

Press button

again.

The

icon will switch off to indicate that the minute

minder has been disabled.

Starting the oven

1. Switch the control panel on by pressing the

button. The appliance buzzer sounds three times

(ascending) and all buttons light up in sequence.

2. Press the button corresponding to the desired

cooking mode. The TEMPERATURE display shows:

- the temperature associated with the mode, if

programming manually;

- “Auto”, if programming is automatic.

The TIME display shows:

- the current time, if programming manually;

- the duration, if programming is automatic.

3. Press the

button to begin cooking.

4. The oven will begin its preheating phase, the

preheating indicators will light up as the temperature

rises.

5. When the preheating process has finished, a

buzzer sounds and all the preheating indicator lights

show that this stage has been completed: the food

can then be placed in the oven.

6. During cooking it is always possible to:

- change the temperature by pressing the

button, followed by the + and - buttons (manual

modes only);

- set the duration of a cooking mode (see Cooking

Modes);

- press the

button to stop cooking. In this case

the appliance stores the temperature modified

previously in its memory (manual modes only);

Start-up and use

1 2 3 4 5 6 7 8 9 10 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Hotpoint OL 1038 LI RFH Mode d'emploi Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Fours Hotpoint OL 1038 LI RFH