Hotpoint OL 1038 LI RFH Mode d'emploi télécharger pdf (Page 6)

- switch off the oven by pressing the button for 3

seconds.

7. If a blackout occurs while the oven is already in

operation, an automatic system within the appliance

will reactivate the cooking mode from the point at

which it was interrupted, provided that the

temperature has not dropped below a certain level.

Programmed cooking modes which have not yet

started will not be restored and must be

reprogrammed (for example: a cooking mode has

been programmed to start at 20:30. At 19:30 a

blackout occurs. When the power supply is restored,

the mode will have to be reprogrammed).

! There is no preheating stage for the GRILL mode.

! Never put objects directly on the bottom of the

oven; this will prevent the enamel coating from being

damaged.

! Always place cookware on the rack(s) provided.

Cooling ventilation

In order to cool down the external temperature of the

oven, a cooling fan blows a stream of air between the

control panel and the oven door, as well as towards

the bottom of the oven door.

! Once cooking has been completed, the cooling fan

continues to operate until the oven has cooled down

sufficiently.

Oven light

The light comes on when the oven door is opened or

when a cooking mode starts.

When models featuring LED INSIDE technology

begin cooking, the LEDs on the door light up for

improved illumination of all cooking levels.

The

button can be used to switch on the light at

any time.

Residual heat indicators

The appliance is fitted with a residual heat indicator.

When the oven is off, the “residual heat” bar on the

display lights up to indicate high temperatures inside

the oven cavity. The individual segments of the bar

switch off one by one as the temperature inside the

oven falls.

Demo mode

The oven can operate in the DEMO mode: all heating

elements are deactivated, and the controls remain

operative.

To activate DEMO mode, press and release button

, then buttons + and - simultaneously for 6

seconds, and then press and release button . A

buzzer sounds and the TEMPERATURE display

shows “dEon”.

To deactivate DEMO mode, when the oven is off

press and hold button

and button -

simultaneously for 3 seconds. A buzzer sounds and

the “dEoF” message disappears from the display.

Restoring the factory settings

The oven factory settings can be restored to reset all

selections made by the user (clock and customised

durations). To carry out a reset, switch off the oven,

then press and hold the button corresponding to the

first manual cooking mode (top left) and the

button simultaneously for 6 seconds. Once the

restore procedure is complete, a buzzer will sound.

The first time the

button is pressed, the oven will

behave as if it is being switched on for the first time.

Standby

This product complies with the requirements of the

latest European Directive on the limitation of power

consumption of the standby mode. If no buttons are

pressed for 30 minutes and the control panel/door

lock has not been activated, the appliance

automatically reverts to standby mode. Standby

mode is indicated by the high luminosity “Clock

button” light. As soon as interaction with the machine

resumes, the system’s operating mode is restored.

1 2 3 4 5 6 7 8 9 10 11 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Hotpoint OL 1038 LI RFH Mode d'emploi Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Fours Hotpoint OL 1038 LI RFH